View Full Version : WASR10/63 Mag problem
12-02-2010, 03:29 PM
It has been some time since I have posted so I apologize if this has been asked. I have a Romanian AK and I have to fight and struggle to get magazines to go into the mag well. But the same ones click into my VERPR II like silk. I was told the mags are probably not Romanian and that is the problem while others have said the mag well is too tight and needs to be polished. Finally, one owner told me leave it alone, that is what they are like. Any suggestions?
12-02-2010, 04:11 PM
Sounds like your mag well or mag catch need to be modified.
Post this in general firearms discussion if you want to get more replies.
12-02-2010, 11:48 PM
Sounds like the mag well or the rails that keep the mag from wobbling are cut too long. You can take them down some with a Dremel tool or a mill. Just be careful not to take too much off. Or you will wind up with allot of mag wobble.
12-03-2010, 11:03 AM
Thanks for replying. I am not competent enough to grind or cut anything but there is a company here in Missouri that might help.
12-03-2010, 11:41 AM
Your local gun shop would be your best shot. allot of those guys are gunsmiths or have one they use.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.