PDA

View Full Version : The AK selector/safety


tire iron
12-03-2003, 02:13 PM
The biggest downfall with the AK is the 'selector/safety'. It never was designed to be easily manipulated. It was designed so the 'peasant/revolutionary/conscript' had to actually THINK about what he had to do to get the rifle ready to fire. So that stipulated that he actually take his hand off of the pistol grip, move it up and forward to move the selector from safe to full or semi-auto. And contrary to popular belief, the F/A (full auto) position was first, knowing the conscript - in the 'heat of the moment' - would 'push right on through' to the last position - semi-auto. Then he would move his hand back to the pistol grip and begin firing. Savvy operators operate the AK with the firing thumb resting on the 'shelf' of the selector - with the fingers sort of 'cupping' under the trigger guard/receiver. They moved the selector with the thumb, then rotated the hand backward and down onto the pistol grip with the first finger ready to enter the trigger guard. (See photos below of Russian soldiers in Chechnya. Note how is thumb is on the selector and his fingers are 'cupping' the trigger guard in the first 'soldier picture'. In the second one - he has his thumb over the top of the receiver - to manipulate the safety he just brings his thumb down on to the selector 'pad' like the like the first picture. It takes a bit longer, but is a bit easier too as that hand can help hold/carry the rifle better this way.) The third photo on the right is a close up of the 'patrol ready' carry technique.
http://www.imagestation.com/picture/sraid91/p0087ace058132f1912a8a50363fde1b2/fa649450.jpg
http://www.imagestation.com/picture/sraid91/pbed45517fa5fcb9be453e765dcf4e844/fa649432.jpg
http://www.imagestation.com/picture/sraid91/p320e2d34629eb2eb7e811283e66429a9/fa649a0b.jpg

An alternative is to have one's first finger on the shelf, and the rest of the hand sort of just hanging onto the side of the receiver - but this is strictly for those that have unusually long fingers (the only guys I know with fingers long enough are all proctologists!). This technique can only be used for very short time periods, and is not comfortable at all. Here is a picture of the 'proctology method'.
http://www.imagestation.com/picture/sraid91/p14a2c88dd9be074958dfd3d67ea575f5/fa649a75.jpg

However - there is some SERIOUS new 'help' in the selector department. Enter Randy Sloan of 'Blackjack' fame (you can reach him at: http://www.blackjackbuffers.com here). He is the guy that makes those great buffers for our AK's and other firearms. He has designed a new selector/safety that is SUPERB. There have been other attempts - even by some nationally known gunsmiths that have offered safeties with a 'hump' or 'tab' to help the firer out - but they have all fallen short of the goal - which is - to allow the shooter to keep his hand on the pistol grip - yet also to quickly and easily move the selector from 'Safe' to 'Fire'. Well - Randy did it!! I can leave my hand on the pistol grip - and my first finger is resting on a 'dropped down' shelf that Randy has welded onto the selector.
http://www.imagestation.com/picture/sraid91/pfd8da1e33c6d2f3ded6cea1633145a31/fa649507.jpg

CONTINUED

tire iron
12-03-2003, 02:16 PM
The 'drop down shelf' is ESSENTIAL to allow the shooter to manipulate the selector COMFORTABLY and EASILY. Without the 'drop down shelf' - one MUST take one's hand off of the pistol grip - which is BAD. With the drop down shelf - to move it to "Fire" I just exert a small amount of pressure downward with my finger, and the selector moves down to the "Fire" position and my hand STAYS on the pistol grip - READY TO FIRE. Then I just keep my finger moving downward onto the trigger.
http://www.imagestation.com/picture/sraid91/pcb5dd9b3d3bdf02d218cc85d93168be1/fa6498e2.jpg
http://www.imagestation.com/picture/sraid91/pd542a0853d89e4d247be36a6eeb483a1/fa64994b.jpg

When I am done firing, I raise my finger up - it then contacts the bottom of the pad, and while exerting a small amount of effort move the selector up to the "Safe" position.
http://www.imagestation.com/picture/sraid91/p1798c014e5455f6d345c1daf8a478585/fa648cf3.jpg

CONTINUED

tire iron
12-03-2003, 02:19 PM
The last two photos show the 'Blackjack' safety in use. One photo is at 'Patrol Ready' (note the firing hand is on the pistol grip) and the next photo is shouldered - finger on safety ready to swipe it down. In the photo's it may look a little awkward to have the firing finger up on the safety like that - but it is not uncomfortable in the least - and it beats the HECK out of the way soldiers deal with the selector without this modification!
http://www.imagestation.com/picture/sraid91/p33b8a33e73778ef7dfc3560df7804a25/fa649aae.jpg
http://www.imagestation.com/picture/sraid91/pf814a1089145760f37af17e0929b69b5/fa649b07.jpg

IMHO no AK rifle should be without this new safety/selector. It enhances performance, it enhances safety and GREATLY improves the ergonomics of the AK by addressing the biggest flaw the AK possesses. This is a 'must buy'. And at $30 delivered - it within the reach of even the poorest of patriots.

Disclaimer: I have no stock/interest/financial gain/business relationship with Blackjack or Randy Sloan. This is a superior piece of kit - at an attractive price - that is why I am so 'sold' on this safety/selector modification. It truly brings the AK's handling characteristics/performance into the 21st century.

Here is the link again: http://www.blackjackbuffers.com

cheers

tire iron

BigAl
12-04-2003, 08:15 PM
seems liek a really good idea....BUT...there's no way in hell i'll have my safety on in an urban combat setting! Finger to the side....

Blackjack
12-06-2003, 06:18 PM
I have both the un-notched and the notched (holds the bolt back)versions available now.

sdcromer
12-31-2003, 09:57 PM
Originally posted by Blackjack
I have both the un-notched and the notched (holds the bolt back)versions available now.

Randy,

Can you email a picture of the notched version (and pricing)

Thanks,

Stephen Cromer
sdcromer@charter.net

sdcromer
12-31-2003, 09:59 PM
Never mind. I just found it on page III.

;)