PDA

View Full Version : 8MM question

whos2kno
11-12-2001, 07:49 PM
went to the gun store to buy a bore brush but they did not have my size (size does matter ;) )what size is the next best size.I like a tight fit.

I hope my wife does not read this

whos2kno
TheRifleman
11-12-2001, 07:55 PM
An 8mm bullet is .323 diameter I think, so anything close to that should work OK. I would use a 308 bore brush cause thats what I have.
Richard Simmons
11-12-2001, 08:46 PM
I used a .38 bore brush the other day and it worked OK. My .308 bronze brushes seem to sear out too quick. I could only get a little resistance in my 8mm and after a couple cleanings in my 7.62 they get loose real quick. I wonder if stainless steel would last longer but maybe be too hard on the bore? I also tend to use my brushes for the next size down when they wear out. Everything for my 47 will soon clean my 74.
REDSTAR
11-12-2001, 09:23 PM
After I get inside her I just sit still for a minute or two until she can expand a little to accomidate the wide load she's carrying.
You see I've always felt that patience in these situations is.....Oh wait a minute...your asking about gun stuff. Sorry.

I got a cleaning kit with my Yugo M48 that I use has a brass brush. If I'm lazy I'll just use one of the many AK kits I have laying around.
whos2kno
11-12-2001, 10:16 PM
Originally posted by REDSTAR
After I get inside her I just sit still for a minute or two until she can expand a little to accomidate the wide load she's carrying.
You see I've always felt that patience in these situations is.....Oh wait a minute...your asking about gun stuff. Sorry.

I got a cleaning kit with my Yugo M48 that I use has a brass brush. If I'm lazy I'll just use one of the many AK kits I have laying around.

lol WIDE LOAD

i got a kit with my M48a but never used it,pull through type
http://albums.photopoint.com/j/View?u=1294733&a=9601632&p=53258618&Sequence=0&res=high
REDSTAR
11-12-2001, 10:53 PM
Man I like the grain in your stock. That's one of the better ones I've seen. Mine is nice but not so grainy.
1 Patriot-of-many
11-12-2001, 11:25 PM
That's a load allright,but I'll be polite.....
TheRifleman
11-12-2001, 11:30 PM
Man whos2kno, that is a beautiful rifle.
Schuetzenman
11-13-2001, 06:57 AM
Yep that's a beautiful stock on the 48A.
Mac_Muz
11-13-2001, 11:55 AM
To bad the ram rod is so short...yer wife:rolleyes: