Closer look at my PPSH-41 kit

[C_Kassidy]

For all you in doubt, I thought I would post some closer looks at the parts and the cuts of my kit from Centerfire Systems.
The whole kit:
http://www.gunco.net/gallery/data/500/medium/DSCF0709.JPG
The trunnion and pivot pin cut. I think this can be rebuilt with a good welder:
http://www.gunco.net/gallery/data/500/medium/DSCF0710.JPG
The barrel. Its virtually unfired. The only evidence of being fired is the buffer has a little bit of nicks in it.
http://www.gunco.net/gallery/data/500/medium/DSCF0710.JPG
The front sight barrel shroud cut. I wonder why this cut is necessary ? This too can surely be fixed by an accomplished welder:
http://www.gunco.net/gallery/data/500/medium/DSCF0712.JPG
The bolt face showing the removable firing pin:
http://www.gunco.net/gallery/data/500/medium/DSCF0713.JPG
The inside of the lower receiver:
http://www.gunco.net/gallery/data/500/medium/DSCF0715.JPG
The selector switch for auto and semi.
http://www.gunco.net/gallery/data/500/medium/DSCF0716.JPG

It really does suck that we can't just make this semi and keep the open bolt design. It would make conversion so much easier. I know, big brother don't want us civilians to have a ready convertable sub machine gun. :losingit:

[blobman]

oh the humanity,thats a freakin shame