Maadi AK47 Trigger Jam

[Johann]

I have a MAADI MISR AK47. After about 100 rounds fired I began experiencing a problem with the trigger not snapping back into place after a round is fired. Although the rounds are chambering normally, it is necessary to push the back of the trigger back into place after every fired round. I have cleaned and lubricated the mechanism but no luck. Any suggestions?

[MAC10]

get the us parts out.

[Tampstick]

Just guessing but,Check and see if the bottom of the seer is hitting the trigger and causing the trigger to mushroom and hang up on the receiver. I had the same problem with a Maadi RPM