PDA

View Full Version : Bollester Molina .45 anybody?

overfiend
02-15-2002, 11:21 AM
Anybody have any experience with these? Sog has um for about $200
TheBigCAx
02-17-2002, 02:01 PM
I'm interested. There's another dealer on the list, like JLD, that deals in em. I'd like one.

I heard one bad report from a bad about a great looking gun, but turned out to be a piece of shit; i.e., you could shake it and hear parts rattling. It's in here somewhere. I believe it to be an isolated incident.

Hope I'm not wrong.
NC_Rebel
02-18-2002, 03:05 PM
Originally posted by TheBigCA
I heard one bad report from a bad about a great looking gun, but turned out to be a piece of shit; i.e., you could shake it and hear parts rattling. It's in here somewhere. I believe it to be an isolated incident. CA, are you thinking of the post that Sesh made about his loosey-goosey Sistema?
TheBigCAx
02-19-2002, 03:15 PM
That could be right, NC-Rebel. Confused em. I'm still learning.
NC_Rebel
02-20-2002, 01:26 PM
No prob, CA. :D

All I've heard about the Molina is that they're decent shooters, but that the only parts that are interchangeable with Colt are the mags and the barrel. That may not be a big deal to some, but to me that's a legitimate issue, especially if you want to accessorize the gun or replace the grips, etc.
JBP
02-20-2002, 04:25 PM
The biggest difference (besides the parts compatability) between the Ballester Molina and the 1927 Sistema Modelo is the grip safety. I have one of each and the 1927 that I got from JLD is in better condition than the Molina (but not by much). They are both good shooters and I have never had a problem with either one (but I only have ever fired ball in both of them). The 1927 has a very tight mag well (which was reported also over at TFL). So far the only mag that slides in smoothly is the one that came with the pistol. None of the Molina's, both the ones that came with it or aftermarket, give me this problem.
TheBigCAx
02-20-2002, 07:18 PM
Need to do some more research on these. I need to acquire a couple of Makarovs first though. :)
thors hammer
02-20-2002, 10:49 PM
my brother got one and reports that it jams every 3rd round

i havent seen it so dont ask me why, any advice would be appreciated
VonFatman
02-25-2002, 04:38 PM
Hmmm....I've heard both ways. Most the talk is good and the biggest drawback pointed out is always parts interchange.

I think Tuco and Parallax Bill's forums may shed more light on these...also the 1911 forum may have information.

I was VERY close to buying one TODAY!!! But I just happen to come upon a VERY nice G.I. Inland M-1 Carbine that needed a home...so the Molina waits.

VF
neilwest
02-26-2002, 10:55 AM
1. Almost took the plunge the other day but didnt know if it was a C&R or not.

2. Im looking for a Broomhandle right now. I have one at the pawnshop but havent picked it up yet, Let me know if any out there cheap.;)
VonFatman
02-26-2002, 02:27 PM
Neilwest,
I'm real ignorant on most guns, but Mauser Broomhandles...I know what they look like...that's it. What would be a cheap price should I come across one?
VF
neilwest
02-26-2002, 02:31 PM
1. It depends on model, Ive seen Chinese for as little as 400.00 and German Mauser 96 types as high as a couple thousend. I would take anything under say 600.00
VonFatman
02-26-2002, 02:36 PM
Neilwest,
I'll keep my eyes peeled!
VF
Billrube
03-01-2002, 09:24 PM
I bought one from SARCO a month or so ago. $224 for exc. arsenal refinished.
It's a winner in every category as far as I'm concerned. It is blued-a deep black/blue with new wood grips. I fired it for function and had no problems. I also bought some .45 mags NIW for $4.95 each. I took it to the pistol range and put all 4 of the new mags thru it rapid fire. At 15 feet there was a ragged fist sized hole in the center of the shoot'n'C I had on the silouette.
It's a fine shooting pistol.
VonFatman
03-01-2002, 10:00 PM
Billrube,
Sounds great!
VF
TheBigCAx
03-13-2002, 07:01 PM
I ordered a .45 Ballester Molina today from SOG. Can't wait to have a .45 cal in the arsenal.
neilwest
03-13-2002, 07:17 PM
1. Ive decided to take the plunge in April for one. Ive been on the fence for two months now.:)
TheBigCAx
03-20-2002, 07:04 PM
Neil:

The pistol from SOG is near perfect. A little ramp polishing work needs to be done, and I've found that roundnose ammo 235 grain PMC works the best in her.

I'll have to get some pictures up soonest. I shot it last night 100 rounds, and it's accurate and feels good to shoot.
AKWARRIOR
03-21-2002, 11:58 AM
Originally posted by TheBigCA
Neil:I've found that roundnose ammo 235 grain PMC works the best in her.


Roundnose???Its FMJ.:D 1911 style 45's were designed to fire FMJ exclusively.They generally dont feed other types of ammo very well.

Regards,
whos2kno
03-21-2002, 08:09 PM
Originally posted by TheBigCA
Neil:

The pistol from SOG is near perfect. A little ramp polishing work needs to be done, and I've found that roundnose ammo 235 grain PMC works the best in her.

I'll have to get some pictures up soonest. I shot it last night 100 rounds, and it's accurate and feels good to shoot.
are you happy with it? was think of getting one my self
whos2kno
TheBigCAx
03-21-2002, 08:34 PM
Yes WTK, I love it. I would heartily recommend one. These are nice pistols.
JKeith
03-22-2002, 10:21 AM
The Ballester Molina is a nice gun. I've got one from JLD and 2 Sistemas, also from JLD. Never had a problem with any of them and have fed several different brands of ammo through them.

The only drawback to the Molina is getting replacement parts if something does go wrong.
neilwest
03-26-2002, 06:15 PM
1. I took the plunge a bought one yesterday. Should be getting it any day now:D
whos2kno
03-26-2002, 07:29 PM
Originally posted by neilwest
1. I took the plunge a bought one yesterday. Should be getting it any day now:D
i thought you where done buying guns for this month;)
whos2kno
VonFatman
03-26-2002, 11:20 PM
Neilwest,
Sound great! I still have not placed an order. Where did you order your's from?...and what did it set you back?
I did shoot my Sistema tonight!
VF