Bulgarian SA-93 Manual

[reload]

Just picked my first AK, an SA-93,no accessories, cleaning kit or manual. Anyone out there have an extra or one they could photocopy for me, more than happy to reimburse you for your trouble.

[CJ]

Reload, I have a manual for the SA-93 but I will have to go look for it. Will be able to copy it for you.(Name your price).Hope this will help.

[reload]

Re:CJ
Definitely interested and I appreciate the help. My e-mail is ( nemesis9@gte.net ) . Send me e-mail when you find the manual and I'll make arrangments with you.

[ggm]

hey guys - help , i need one also

[Stokesx]

I have a manual if anyone is interested.

[Popshot]

Do any of you know the proceedure on removing the trigger and hammer pin retaining spring on th sa-93?

------------------
Popshot

[Stokesx]

Sorry pop shot I have never had a need to break the rifle down that far.

[Tomac]

Popshot, on the left side of the receiver you'll see a retaining spring that locks in both the trigger & hammer pins. If memory serves you need a small hook to pull up the retaining spring out of the pin notch where it crosses over the trigger/disconnector, then the trigger pin can be pushed out to the left. After removing the trigger/disconnector you need to push down on the retaining spring to clear the pin notch on the bottom then push the hammer pin out to the left. After removing the hammer & hammer/trigger spring you can rotate the safety (which holds the retaining spring) up until it matches the receiver hole and remove the safety from the right side of the receiver. You can now lift out the cross pin retaining spring. (I hope I didn't leave any steps out...) HTH...
Tomac

[Popshot]

Tomac, Thats how one takes out a standard "chinese" type retainer, this is a different type of retainer that doesn't connect to the selector lever...looks like a hairpin

[Popshot]

Surely someone has removed the trigger group from a sa-93 with this "hair-pin" looking retaining spring. If you have please share the proceedure.