Results 1 to 12 of 12

Thread: Does any one have exp. with the rubber buffer ment to reduce wear.

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member

    Join Date
    Jan 2012
    Posts
    5

    Does any one have exp. with the rubber buffer ment to reduce wear.

    I just installed one on my M10 AK and it seemed to want to stick every now and then when i manually slid the bolt back and forth. Does anyone know of any problems with them? Also got my slide fire stock today. Haven't had chance to try it out yet, maybe this weekend. It was a easy install, took about 15 min. I just hope it holds up every thing is made of plastic. We'll see.
    Last edited by Norm; 01-13-2012 at 10:21 AM.

  2. #2
    Team GunsNet Bronze 07/2012 videodon's Avatar

    Join Date
    Jul 2010
    Location
    Indianaland
    Posts
    827
    Welcome!
    What brand is your buffer?
    I have Blackjack Buffers in all my AKs and PSL.
    No problems to date.


    ...if you're manually cycling it can seem to "stick" occasionally.
    If you pull back and let go it shouldn't as much or at all.
    Firing / break-in should correct all that.
    Enjoy!
    Last edited by videodon; 01-12-2012 at 06:15 PM. Reason: added info
    видеодон

  3. #3
    Junior Member

    Join Date
    Jan 2012
    Posts
    5
    I believe its a black jack but not sure got it from classic arms. it may be fine i haven't fired it with it yet

  4. #4
    Team GunsNet Bronze 07/2012 videodon's Avatar

    Join Date
    Jul 2010
    Location
    Indianaland
    Posts
    827
    You should be good to go.
    Shoot the heck out of it!
    видеодон

  5. #5
    Administrator imanaknut's Avatar

    Join Date
    Jul 2010
    Location
    Indiana, a state that is trying to remain free.
    Posts
    12,280
    Welcome to the group !!!

    I have Blackjack buffers in all the AK variants I shoot. In fact I did some testing for Blackjack many years ago and will never fire an AK that I own without one in place.

    That said, the AK was not designed for the bolt carrier to be cycled slowly by hand. You shouldn't have any problems when you cycle it as designed, under fire.

  6. #6
    Junior Member

    Join Date
    Dec 2011
    Posts
    11
    I had one on my AK74 some years ago. But someone reminded me that AK's have been around since what? 1947? and they never needed a buffer until some American company decided there was a market for them. All my AK's work fine without them!

  7. #7
    Administrator Krupski's Avatar

    Join Date
    Oct 2001
    Location
    ┌П┐(◣_◢)┌П┐
    Posts
    15,653
    Quote Originally Posted by Norm View Post
    I just installed one on my M10 AK and it seemed to want to stick every now and then when i manually slid the bolt back and forth. Does anyone know of any problems with them? Also got my slide fire stock today. Haven't had chance to try it out yet, maybe this weekend. It was a easy install, took about 15 min. I just hope it holds up every thing is made of plastic. We'll see.

    I use the big thick white buffers in my Kalashnikov rifles (from Buffertech). They get all beat to hell after around 1000 rounds, so obviously they are absorbing a lot of damage that would normally go into the receiver.

    Contrary to what everyone says, a thick buffer DOES NOT cause cycling and feed failures (if it does, something is wrong with the RIFLE).

    Concerning your bolt carrier "sticking" when you rack it - that's normal. The bolt carrier rides over the hammer and causes drag (sometimes enough to *almost* hold the bolt open). It's completely normal (and has nothing to do with the buffer anyway).

    Oh by the way, welcome to Gunsnet!

    You want to know anything there is to know about an AK (or AR or anything else) and talk to a lot of nice people (well, MOST of them are nice! ) you came to the right place!
    Gentlemen may prefer Blondes, but Real Men prefer Redheads!

  8. #8
    Junior Member

    Join Date
    Aug 2012
    Location
    Ohio
    Posts
    21

    Buffers

    I personnally think buffers are the greatest thing to come down the pike! I had a Tiger carbine 15 or 16 years ago that I fired about 50 or 60 times without a buffer and there was a definate "imprint" of the rear of the carrier slamming the reciever. I think they will definately extend the life of any weapon with a recipricating bolt...............................

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •