I'm in the market for one of these. any suggestions?
I'm in the market for one of these. any suggestions?
Be careful which brake you get because the SAR-1 has a narrower barrel than many AKs, and a pin on for an SKS or Norinco will have too large a diameter ID. I have used one on an SAR-1 that was designed for a MAK-90, but I had to shim around the barrel to get the brake tight. I then checked the alignment and was glad I did as the end of the brake did not line up with the bore. I used a bore diameter wooden dowel and redrilled the end of the brake until there was enough clearance to assure me that a round leaving the SAR-1 would not strike the end of the brake.
That brake has been on the rifle ever since, having gone through over 13K rounds and amazingly not affecting the accuracy of the rifle.
Threading it yourself is easy and cheap, especially if you can find someone who already owns the tools and will lend them to you. EASY job.
"I'm fucking furious, I'm violently angry, and I like it. If you don't know what that feels like then I feel bad for you"
Gentlemen may prefer Blondes, but Real Men prefer Redheads!
Thats correct,it has a bare muzzle.
Bookmarks