Results 1 to 8 of 8

Thread: Demilled ak47 polish underfolder

  1. #1
    Junior Member

    Join Date
    Feb 2013
    Posts
    12

    Demilled ak47 polish underfolder

    Hi

    I have 12 demilled polish underfolders..
    And i can get even more!!!
    Not replica or whatever!!!


    How its demilled..
    Barell drilled 6times
    Steel pin in barell
    Bullet chamber welded
    Bolt head cut,firing pin channel closed
    Trigger mechanism blocked

    Pictures coming soon.

    I will ship the ak47 to US.
    Ak's are located in belgium..

    Contact me at sempatik_kayserli@hotmail.com
    Or call me at 0032489109055












    Last edited by Kayserlee; 05-31-2013 at 03:17 AM. Reason: Pictures

  2. #2
    Senior Member

    Join Date
    Feb 2012
    Posts
    136

    Re: Demilled ak47 polish underfolder

    Just curious as to what the use for a gun that doesn't work is?

    Sent from my SCH-R760 using Tapatalk 2

  3. #3
    Senior Member NAPOTS's Avatar

    Join Date
    Nov 2001
    Posts
    3,750
    Well you de-milled many of the parts that would be of any use to anyone here and you left the receiver relatively in-tact which is something we cannot have.

  4. #4
    Senior Member

    Join Date
    Feb 2012
    Posts
    136

    Re: Demilled ak47 polish underfolder

    I take it the reciever is set up for full auto? If so, would this be a cheap way to make a full auto gun using that reciever? Then only have the extra $200 for the tax stamp?

    Sent from my SCH-R760 using Tapatalk 2

  5. #5
    Junior Member

    Join Date
    Feb 2013
    Posts
    12
    Well my ak47 is working again after some parts replacement..
    Barell etc,that i bought from usa..

    It's up to u,wich purpose u wanne use this.. Rebuild or parts kit..
    Melt or cut the receiver or use it..

  6. #6
    Administrator imanaknut's Avatar

    Join Date
    Jul 2010
    Location
    Indiana, a state that is trying to remain free.
    Posts
    12,280
    Quote Originally Posted by Aaron1100us View Post
    I take it the reciever is set up for full auto? If so, would this be a cheap way to make a full auto gun using that reciever? Then only have the extra $200 for the tax stamp?

    Sent from my SCH-R760 using Tapatalk 2
    It is against the law for you to make a new full auto, or select fire weapon that wasn't registered before May 1986. Unless you have the proper papers as a dealer, but still you could not sell it and there are strick limits for dealers to make one.

  7. #7
    Senior Member NAPOTS's Avatar

    Join Date
    Nov 2001
    Posts
    3,750
    Quote Originally Posted by Kayserlee View Post
    Well my ak47 is working again after some parts replacement..
    Barell etc,that i bought from usa..

    It's up to u,wich purpose u wanne use this.. Rebuild or parts kit..
    Melt or cut the receiver or use it..
    As far as I know that receiver can't be brought into the US unless it is cut up into three pieces with a torch and I think the locations of the cuts has to be in certain spots. The Barrel can't be brought in, in-tact either right now, but I believe the rest of the parts can be brought in in working condition.

    Someone more in the know want to chime in, those are awesome looking underfolders but being a milled receiver I am not sure how much of a kit you'd have after the receiver and barrel are cut up.

  8. #8
    Forum Administrator

    Join Date
    Jan 2011
    Posts
    93
    Knock knock.........who is it? Customs you moron! Nice pics but that where the story ends.................................

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •