Results 1 to 2 of 2

Thread: CETME L Parts Kit Introductory Sale at APEX Gun Parts

  1. #1
    Advertiser APEXgunparts's Avatar

    Join Date
    Jun 2011
    Location
    Colorado
    Posts
    173

    Thumbs up CETME L Parts Kit Introductory Sale at APEX Gun Parts

    INTRODUCTORY SALE PRICE..BUY NOW! This deal will be GONE soon!!
    Original CETME Model "L" parts set, 5.56 NATO, USED in good condition $225




    Follow this link to purchase:
    https://apexgunparts.com/product_inf...oducts_id/2439

    Sold as a kit (as pictured).

    What a find! If you already have a CETME "C", now you can have it's little brother, too!
    These kits are complete minus the barrel and receiver.
    The rear sight small detent ball & spring may be missing.
    No de-milled barrel or receiver pieces are included.
    Kits are OD green in color, and show significant wear from years of military service.
    These kits will be faded, discolored, and may have scratches deep into the synthetic stock
    The CETME-L is chambered for the 5.56mm NATO round, and accepts standard AR15/M16 magazines.

    These kits will come with one of two types of flash hiders, either a 3-Prong "Duckbill" or a standard A2 "Birdcage" device (NO Selection is available).
    The bayonet lug and sling ring are still intact, attached to the front sight block.

    GET YOURS BEFORE THEY'RE GONE!!!

    General Information about the CETME Model L rifle

    Caliber: 5.56x45 mm NATO (.223 Remington)
    Action: delayed blowback
    Overall length: 925 mm
    Barrel length: 400 mm
    Weight: 3.4 kg empty
    Rate of fire: 600-750 rounds per minute
    Magazine capacity: 12 or 30 rounds

    The Model L rifle was developed by the Spanish company CETME (now Santa Barbara SA) as an improvement over the previous CETME C. These CETME rifles, have their roots in the WW2 German MP43/MP44/Stg.45 assault rifle, developed by Mauser. After WW2, some Mauser designers moved to Spain and began working for CETME, where eventually the CETME C was developed, chambered for 7.62mm NATO cartridge. CETME continued development. In the mid 1960’s CETME design engineers began working on a smaller caliber rifle. Development was completed in 1980 when the first prototype Model L appeared using the 5.56mm cartridge. The production of the Assault Rifle Model L began in 1984, and was adopted by the Spanish army.
    In 1999, this rifle was replaced in service by the H & K G36E assault rifle.
    Like the all the earlier guns the CETME model L is a delayed blowback operated, selective fire assault rifle. The bolt has two parts. There are two rollers in the bolt head, which are used to accelerate the bolt body and to retard the bolt head which maintains the cartridge in the chamber until the firing pressure drops. The chamber walls are grooved to help extraction. The Model L rear sight is a simple flip-up "L" shaped sheet with two openings 200 and 400 meters. The magazine opening is designed to accept M16-type magazines.

    Follow this link to purchase:
    https://apexgunparts.com/product_inf...oducts_id/2439




    Original 30rd magazine for the CETME-L rifle and NATO standard M16, steel, 5.56mm/.223, USED in good condition SOLD AS-IS $5



    Follow this link to purchase:
    https://apexgunparts.com/product_inf...oducts_id/2891




    Original 12rd magazine for the CETME-L rifle and NATO standard M16, steel, 5.56mm/.223, USED in good condition SOLD AS-IS $7.50



    Follow this link to purchase:
    https://apexgunparts.com/product_inf...oducts_id/5067

    Sold individually (as pictured).

    These magazines are just what your rifle needs!
    Originally designed for the CETME-L rifle, these magazines will fit standard Mil-Spec AR15 rifles & carbines as well.
    This magazine will not fit the CETME C rifle in 7.62X51/.308!
    The unique follower design of these steel magazines is designed for no-fuss feeding.
    NOTE: The steel follower in this magazine will not engage the bolt hold open function in a standard AR15/M16.
    Heavy duty steel construction means these won't give out on you!
    Accepts 5.56mm NATO/.223 Rem ammunition.

    These and many other kits/parts/barrels/magazines are available for sale on our web site.

    APEX Gun Parts
    719-481-2050 ORDER LINE

    http://www.apexgunparts.com
    Mon-Fri 8am to 4pm Mountain time

    LIKE us on Facebook!
    https://www.facebook.com/ApexGunParts
    APEX Gun Parts
    http://www.apexgunparts.com

    719-481-2050 Order Line
    3105 North Stone Avenue
    Colorado Springs, CO 80907
    Mon-Fri 8am to 4pm Mountain time

    Like us on FaceBook:


    Follow APEX on Twitter:

  2. #2
    Team Gunsnet SILVER 05/2012 deth502's Avatar

    Join Date
    Jul 2010
    Location
    PA
    Posts
    3,581
    wish i still had the time to do parts kits.

    very interested if complete rifles become available, though.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •