Results 1 to 11 of 11

Thread: Wood vs Coal for heating/cooking

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Moderator & Team Gunsnet Platinum 07/2011 O.S.O.K.'s Avatar

    Join Date
    Jul 2010
    Location
    Deep In The Heart of Texas
    Posts
    9,363

    Wood vs Coal for heating/cooking

    So what's the difference in buring rate, amount needed to generate x amount of btu's, etc.?

    I know that for folks that live on land and have a constant supply of wood from downed trees, etc. there's no need or want for coal.

    But if you have to purchase the fuel.... then would coal be a more efficient fuel?

    It sure stores better.... doesn't rot like wood or attract insects.
    ~Nemo me impune lacessit~




  2. #2
    http://www.decato.net/coal.htm

    http://www.harmanstoves.com/products...rd=coal-stoves

    They look neat.

    Other than a soup pot on top of the stove I am not too sure about cooking with coal.

  3. #3
    Moderator & Team Gunsnet Platinum 07/2011 O.S.O.K.'s Avatar

    Join Date
    Jul 2010
    Location
    Deep In The Heart of Texas
    Posts
    9,363
    I was thinking about a chart or some information showing burn rates, btu per pound or something like that.

    But that did establish that coal is easier to deal with and regulate...

    I wonder if I can find $200/ton coal in 40 pound bags... locally.

    I've done some looking around and I mostly find landscaping supply type places listed for coal...
    ~Nemo me impune lacessit~




  4. #4
    Guns Network Contributor 04/2013 El Laton Caliente's Avatar

    Join Date
    Jul 2010
    Location
    In the East Texas woods
    Posts
    6,158
    My guess, living south out of coal county, is that coal is more BTUs by weight and would burn hotter. In the stove you posted you could cook anything that goes into a pot or pan. It does not work in a grill or smoker but you can have separate BBQ wood for that. It should store longer & easier, but might be more of a fire hazard.

  5. #5
    Senior Member

    Join Date
    Jul 2010
    Posts
    969
    Bear in mind that there are different grades of coal. The lower grade coal creates more slag and doesn't burn as hot. I have a wood stove and a coal stove in my shop. Use the coal stove when the temps got real cold to heat the larger part of my shop. It does get it warm but smells and creates a gray smoke that my neighbor complains about. It actually gets so hot that you can't sit close to it. If you try to regulate the heat with the damper then you create more smoke. I much more prefer the wood stove. I was lucky enough to get a couple dump truck loads of coal for free so that's the only reason I use it. You're right about the storage. I just have it piled up in the open in a pasture and fill up 5x5 gallon buckets of coal and keep in the shop so it'll be dry. A bucket of coal would last about 6-8 hours and there would be coals left in the mornings but not enough to start the fire unless I filled it up around 9 at night.

  6. #6
    Senior Member

    Join Date
    Aug 2010
    Posts
    266
    I've used both and I prefer coal.

    Real heat from a woodstove comes when you build a coal bed. That's the constant heat that really warms your home. With coal you get that right away.

    The only downside is the dirt. Think woodstove x3.

    When you start a coal fire you have to leave the damper wide open for the first 20 minutes or so. If you don't, gasses can build up and explode. I've had it happen. It'll blow your clean out door open....shoot quite a fireball out of the top of your chimney.

    But I could leave my coalstove alone for 14 hours and it would still be heating my house. I like that about it. Screw with it twice a day and that's it.

    Also, coal was selling her for about 55 bucks per ton. I could heat the entire winter on 150 bucks.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •