Close-quarters concept:
AMD-65 TECH Stock Adapter, Magpul AFG & UTG MTU010 Quad Rail
Next will be an EOTECH 512 to sit on top of those rails.
Close-quarters concept:
AMD-65 TECH Stock Adapter, Magpul AFG & UTG MTU010 Quad Rail
Next will be an EOTECH 512 to sit on top of those rails.
Well I was going to revive this thread but someone beat me to it, so I'll just have to post my latest throw together build. It is just as fun to shoot as it was to build.
It's all out of spare parts, it is 7.62 but I was trying to get it to look like a 5.45 I saw in a picture. It has a real light trigger so it will bump even with a drum mag on it.
OK I havent been surfing much here since `07. Didnt realize the site went down for a while either. I bought a load of the Romanian kits with the donkey dick fore grips. when they were cheap. Built all of the bending and rivet fixtures myself out of surplus and scrap materials. My goal was to not spend money on anything I could make myself. Bought the flats before top rails came bent. I did buy compliance kits. Dug up some old patents on parkerizing and mixed the solution with locally available chemicals. No dry cell batteries for donor mix. My goal was to have a small arsenal of identical rifles like military spec that each would have exact same characteristics. Just in case of a zombie apocalypse or shtf, they would be my security blanket. And I do like to hoard certian things that interest me. These are nothing fancy, just built back up to stock specs. No unicorns for me. I did let these sit a very long time in the parkerizing solution and really built up a thick layer thats very uniform. Actually thick enough to sand down and polish to a nice satin finish, if I wanted to put that much effort in a beauty queen. Like I said, nothing fancy just a few of the ones I have on hand. Solid reliable and wont let me down. I could bury these for 20 years and not worry about them firing just like new, if there was a need for them sometime in the future. I really enjoyed building all of these up, and learned a bunch about making everything fit and work properly. I also found out that these parts are hand fitted to each gun and not easily interchangable between them without some major filing. I really got lucky with these. Of all the parts kits I bought only a couple had been actually fired. Most still had the paper strip still in the barrel and n signs of anything but handling over the last 30 + years. A lot of these I parkerized just the receiver assemblies since finish was still perfect.
Last edited by fordtrucksforever; 02-09-2012 at 02:49 AM.
Vmac 9mm upper converted to side cocker
Sten mags
Home made lower
Modified G3 trigger frame converted to semi only
Full length picitinny with HK type clamp on sights
Aluma Hyde II dark park finish
Shooter
Last edited by Shooter17; 02-16-2012 at 08:16 AM.
AMD 65
922r parts:
AKbuilder flat
Tapco G2 FCG
Tapco Muzzle brake
Tapco pistol grip
Polish hand guards
Romanian side folding stock
CNC Warrior 4" barrel extension blind pined and welded
Aluma Hyde II Matte Black finish
Shooter
Here is my most recent build. Romanian WASR-10.
UTG Quad Rail
I/O Optics Side Scope Mount
Tapco G2 Trigger Group
Tapco Stock and grip
Tapco Muzzle RAZR
Gonna be putting a Vortex Strikefire Red/Green on it this weekend.
AMD 65
922r parts
Akbuilder flat
Tapco G2 FCG
Tapco muzzle brake
Tapco pistol grip
Quad rail
Tapco short vertical grip
4 position collapsible stock mounted to modified Romy stock tang
CNC Warrior 4" barrel extension blind pined and welded
Modified Beretta selector for left side thumb safety
Aluma Hyde II dark park gray/matte black
Shooter
There's no problem an AK can't solve...........
GUNSNET Member Since 2003
CCW Permit
03 FFL
Last build of an AKM before I sold off my tooling. Polish underfolder. It was very nice.
Receiver is Armory USA, fcg was G2, piston Tapco.
AMD 65
Akbuilder flat
Tapco pistol grip
Tapco FGC
Tapco muzzle brake
Polish hand guards
Aluma Hyde II matte black finish
Shooter
I recieved this ak in a trade. It is a CAI romanian wasr 10/63, and is in such good shape that I could not turn it down. I am new to AK's so this is my first build and am not done yet. So far I have installed the following items. A tapco G2 dual hook trigger upgrade. An ATI stikeforce collapsible, sidefolding stock ( I am not sure yet if I like it and might go with a magpul instead). An ATI strikeforce grip ( which I love) . A tapco birdcage flash hider. It came with the picatenny dust cover which I am going to replace with an OE dustcover and a sidemount picatenny rail. future upgrades will be an ATI strikeforce forearm and a holographic reflex sight. I am not sure what brand yet but I like the compact sights, and maybe some type of duracoat finish. If any one has any suggestions or advice, leave a comment.
Last edited by armyrecon1; 03-12-2012 at 02:28 AM.
AMD-63, Hungarian. Latest.
Original finish was so good I just made the receiver a color match.
NoDak receiver.
We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm.
George Orwell
Damn rah, all I can say is WOW!!!
There's no problem an AK can't solve...........
GUNSNET Member Since 2003
CCW Permit
03 FFL
All I need is a blond Hungarian buttstock like that and I'd be good to go! That's a beautiful rifle!!!
Just came out of the oven this afternoon.
My first Krink. Yugo M85 5.56mm
We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm.
George Orwell
Does this count?
NRA, TSRA, GUN OWNERS OF AMERICA
BEING THE MODERATOR OF THE ROADHOUSE IS LIKE BEING THE JANITOR OF A PEEP SHOW.
More Yugo fun.
M70AB2
We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm.
George Orwell
Yugo M64
Gunkote.
Curly Maple home made furniture.
We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm.
George Orwell
Rahat, you're still the artist!
Bookmarks