Results 1 to 20 of 49

Thread: Refinishing a CZ-82

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Conributor 09/13 slamfire51's Avatar

    Join Date
    Jul 2010
    Location
    The South
    Posts
    8,200

    Refinishing a CZ-82

    If a person wanted to refinish a CZ-82, what type blasting media would you use to remove the crappy factory finish?
    Would sand be too abrasive?
    There's no problem an AK can't solve...........


    GUNSNET Member Since 2003
    CCW Permit
    03 FFL

  2. #2
    Forum Administrator Schuetzenman's Avatar

    Join Date
    Jul 2010
    Location
    East of Atlanta GA
    Posts
    15,035
    I always favored 120 grit aluminum oxide for blasting weapons. Especially important when using Gun Kote because if the finish is too slick, (glass beads) it won't stick well.

  3. #3
    Conributor 09/13 slamfire51's Avatar

    Join Date
    Jul 2010
    Location
    The South
    Posts
    8,200
    Quote Originally Posted by Schuetzenman View Post
    I always favored 120 grit aluminum oxide for blasting weapons. Especially important when using Gun Kote because if the finish is too slick, (glass beads) it won't stick well.
    Where can a person find Alum oxide?
    There's no problem an AK can't solve...........


    GUNSNET Member Since 2003
    CCW Permit
    03 FFL

  4. #4
    Conributor 09/13 slamfire51's Avatar

    Join Date
    Jul 2010
    Location
    The South
    Posts
    8,200
    To answer my own question, Harbor Freight has 44 lbs. for $49.
    I can pick it up in Nashville and save shipping.

    Thanks for you reply Schuetzenman, I forgot about AO.
    There's no problem an AK can't solve...........


    GUNSNET Member Since 2003
    CCW Permit
    03 FFL

  5. #5
    Senior Member

    Join Date
    Jul 2010
    Posts
    969
    Life is much easier than that. Get you some paint stripper, an old toothbrush and a can of Chemtool carburetor cleaner. Then buy you some of the parkerizing solution from Alleganey Arms. I did one a few months ago and it turned out great. Takes about 30 minutes to clean it and 30 minutes to parkerize it.


    Last edited by jojo; 04-17-2011 at 10:01 PM.

  6. #6
    Conributor 09/13 slamfire51's Avatar

    Join Date
    Jul 2010
    Location
    The South
    Posts
    8,200
    Quote Originally Posted by jojo View Post
    Life is much easier than that. Get you some paint stripper, an old toothbrush and a can of Chemtool carburetor cleaner. Then buy you some of the parkerizing solution from Alleganey Arms. I did one a few months ago and it turned out great. Takes about 30 minutes to clean it and 30 minutes to parkerize it.
    Thanks for your reply, but I plan to use Duracoat, therefore the metal has to be "roughed up" to get the paint to adhere properly.
    I don't want to spend a fortune on a low cost weapon.
    There's no problem an AK can't solve...........


    GUNSNET Member Since 2003
    CCW Permit
    03 FFL

  7. #7
    Junior Member

    Join Date
    Oct 2012
    Posts
    3

    Question What Type of Paint Stripper?

    Quote Originally Posted by jojo View Post
    Life is much easier than that. Get you some paint stripper, an old toothbrush and a can of Chemtool carburetor cleaner. Then buy you some of the parkerizing solution from Alleganey Arms. I did one a few months ago and it turned out great. Takes about 30 minutes to clean it and 30 minutes to parkerize it.


    JoJo - What kind of paint stripper did you use; mineral spirits or another organic solvent base? Thanks, Mark

  8. #8
    Conributor 09/13 slamfire51's Avatar

    Join Date
    Jul 2010
    Location
    The South
    Posts
    8,200

    Got another CZ-82

    I just got another CZ-82, this time from J&G. $231 including shipping.
    It came with just 1 mag and a SIG 225/6 shoulder holster.???????????????
    The shoulder holster is useless because the CZ fits like a BB in a coke can.

    The finish has more holster wear than the last one I bought. Some chipping on the back strap. Grips are in pretty good shape, with dings from normal use.
    Internals look really good. Very little wear if any on the bottom of the slide.

    Taking one of the mags and selling them separately is just wrong for a company to do this.

    All in all, I'm pleased with it.

    Not the best pics, but then again, I'm NO photographer.



    Last edited by slamfire51; 04-22-2011 at 08:29 PM.
    There's no problem an AK can't solve...........


    GUNSNET Member Since 2003
    CCW Permit
    03 FFL

  9. #9
    Moderator & Team Gunsnet Platinum 07/2011 O.S.O.K.'s Avatar

    Join Date
    Jul 2010
    Location
    Deep In The Heart of Texas
    Posts
    9,363
    You will never find one as nice as that first one you bought It's the schitz.



    Put that holster on gunbroker for $30 plus shipping - you can use the proceeds to buy a case of high dollar beer
    ~Nemo me impune lacessit~




  10. #10
    Conributor 09/13 slamfire51's Avatar

    Join Date
    Jul 2010
    Location
    The South
    Posts
    8,200
    Quote Originally Posted by O.S.O.K. View Post
    You will never find one as nice as that first one you bought It's the schitz.



    Put that holster on gunbroker for $30 plus shipping - you can use the proceeds to buy a case of high dollar beer
    You are right, it is a beaut.
    Good idea on the holster.
    I don't drink anymore, but I could use another mag for it.
    There's no problem an AK can't solve...........


    GUNSNET Member Since 2003
    CCW Permit
    03 FFL

  11. #11
    Contributor 02/2014 FunkyPertwee's Avatar

    Join Date
    Jul 2010
    Posts
    11,163
    Im a big CZ82 fan. I just need more mags and a right hand holster, as AIM shipped mine with a lefty.

    I liked mine so much I had to get a CZ-75b Cold War Edition to keep it company.
    "I'm fucking furious, I'm violently angry, and I like it. If you don't know what that feels like then I feel bad for you"

  12. #12
    Conributor 09/13 slamfire51's Avatar

    Join Date
    Jul 2010
    Location
    The South
    Posts
    8,200
    I just found a set of new night sights in my parts box.. They look exactly the same height and dovetails are identical.
    I may install them in the near future. Hmm, I think I got these as a bonus gift from CDNN when I ordered some mags.

    Free is good.

    Last edited by slamfire51; 04-22-2011 at 08:25 PM.
    There's no problem an AK can't solve...........


    GUNSNET Member Since 2003
    CCW Permit
    03 FFL

  13. #13
    Conributor 09/13 slamfire51's Avatar

    Join Date
    Jul 2010
    Location
    The South
    Posts
    8,200

    Removing a CZ's Finish???

    My question is, will Acetone remove the painted finish on CZs? Specifically, the CZ-82.
    I have a gallon of the stuff and since it's a extreme solvent, I'm thinking it should dissolve the paint.
    There's no problem an AK can't solve...........


    GUNSNET Member Since 2003
    CCW Permit
    03 FFL

  14. #14
    Moderator & Team Gunsnet Platinum 07/2011 O.S.O.K.'s Avatar

    Join Date
    Jul 2010
    Location
    Deep In The Heart of Texas
    Posts
    9,363
    I don't think so.

    The finish on the Cz is pretty tough - more of a baked-on enamel or ceramic type stuff.
    ~Nemo me impune lacessit~




  15. #15
    Conributor 09/13 slamfire51's Avatar

    Join Date
    Jul 2010
    Location
    The South
    Posts
    8,200
    Quote Originally Posted by O.S.O.K. View Post
    I don't think so.

    The finish on the Cz is pretty tough - more of a baked-on enamel or ceramic type stuff.
    Yeah, I guess paint stripper is the way to get it off.
    I've been doing some research on refinishing these little pistols.
    The consensus is to strip and blue. I've seen some very impressive looking blued 82s.
    I believe that's the route I'm going to take.

    Here's a link to one.
    http://www.czforumsite.info/index.php?topic=30186.15

    Post #5 at this link.
    http://www.thefirearmsforum.com/showthread.php?t=85962
    Last edited by slamfire51; 04-23-2011 at 05:28 PM.
    There's no problem an AK can't solve...........


    GUNSNET Member Since 2003
    CCW Permit
    03 FFL

  16. #16
    Conributor 09/13 slamfire51's Avatar

    Join Date
    Jul 2010
    Location
    The South
    Posts
    8,200
    Media blasting, specifically sand blasting is what I am doing Wednesday after the parkerizing chemicals arrive.
    I've read that the surface needs to be micro pitted for the solution to go into, thus providing the parking to retain more lube.
    Sounds reasonable to me, so that's what I'm doing.
    There's no problem an AK can't solve...........


    GUNSNET Member Since 2003
    CCW Permit
    03 FFL

  17. #17
    Conributor 09/13 slamfire51's Avatar

    Join Date
    Jul 2010
    Location
    The South
    Posts
    8,200
    The park kit came in yesterday. I took the parts today and degreased them and will sand blast them tomorrow.

    Stay tuned.
    There's no problem an AK can't solve...........


    GUNSNET Member Since 2003
    CCW Permit
    03 FFL

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •