Originally Posted by
imanaknut
The good news is that you can do it yourself. Usually the muzzle cover is just tack welded to the front sight. Using a dremel with a cutoff wheel, cut the weld staying on the muzzle nut side so that you don't risk damaging the front sight. You might need to use a good set of pliers getting the muzzle cover off since it might have a little rust under it keeping it stuck to the barrel.
Now the bad news. The muzzle end of the BWK-92 is cut down from the standard .55 inch diameter to .500". I do not know of anyone who makes an 84S birdcage style flash hider in the 1/2 x28 thread that you can put on that muzzle.
Also bad news, unless you are lucky enough to have them around, finding an original Norinco front sight with the cleaning rod holder, and the gas block with the bayo lug is about as easy as winning the lottery. If you do find the parts, they will not be cheap.
Bookmarks