Next add-on will be to get rid of the front sight post and add muzzle brake because i need to get rid of the vertical rise of the barrel. ANy suggestions on a brake please let me know and with a link if possible. THanks in advance.
Word of advice, thread the barrel. Don't use an adapted, they don't stay. And to use muzzle brake like u want ill have to use a different front site with a pin to hold the brake in place
the only reason i say u might want a front post site is because there is a pin that is there to retain the position of the muzzle brake, which helps reduce muzzle lift
DO you have a link to the ACE stock adapter or a Part number?
Also if you dont mind me asking what was the cost?
BTW nice setup. My Zastava is set up similar. I did the high cap conversion on mine.
I'm also interested in the ACE stock adaptor and total cost. Also how is the sights zeroed on the dust cover rail? I read the dust rail has alot of movement.
I called ACE about the stock adapter, they are selling for $44.99 plus shipping.
For that price I will stick with the one I made for half the cost and that includes the stock.
I ordered the receiver block adaptor from ACE. 44 bux with 7 bux shipping. Can't wait.
Here is my PAP in what I believe is its final state.
I got rid of the universal UTG Quad rail and installed the M70 specific version. Removed the folding stock adapter, and Installed a check riser on the stock. Took her to the range this morning and put another flawless 120rds downrange.
On the 50yrd range with using either the 4x scope or the TRS-25, all shots were hitting within the "9" ring on a 6" target. Basically left one big hole in the paper just high and to the left of center.
On a separate note, when i was using the universal front quad rail, after about the first 20rds the POI would start to shift high and to the right.
With the M70 specific rail I no longer have that issue. Only thing i can think of is it must be do to how the rail mounted. The universal one just mounted with two straps to the barrel, the M70 one has a spacer block that sits between the barrel and gas tube and then the lower and upper parts of the rail are fastened together. The rails are not directly attached to the barrel.
That is awesome man! Is that the demon muzzle break? How well does it seem to work? aside from looking badass that is! I have an M70 quad rail on the way, can't wait to get started on the addition. Nice rifle!
similar to where im at. Used same quad rail, and i love it.
"Faith means making a virtue out of not thinking"
I've received my ACE receiver block. I'm shopping for Stocks tommorrow. Hopefully ill be updating this thread with new pics
I was trying to decide between the demon break and the phantom flash supressor, but after seeing how it looks in that pic my mind is set on the demon. How easy was it to install the side rail scope mount? Currently I'm looking for a way to snug up the dustcover. My scope is overall pretty accurate, but holding an exact 0 is impossible.
What kind of stock and cheek rest is that. It looks good
The Cheek Riser i got from Cabela's found here