Guess what? ...

[raxar]

LOOK MA, I'M TACTICOOL!

[FunkyPertwee]

I like it.

[FunkyPertwee]

[Helen Keller]

Who did you murder for the eotech ?

[imanaknut]

metalman3006, welcome to the group !!!

Very impressive collection you have there!!!!!!!

[raxar]

Who did you murder for the eotech ?

His name was Russel or something, boy did he look surprised when I didn't look like my craigslist pic!

[vit]

Some more nice stuff.

[BISHOP]

Metalman tell me about that one time use only ammo can that comes prepackaged with 308 or is that 30-06 cloth belted ammo?
First off all how much was it? and what year was it purchased?
How many rds was on the belt?
What country?
Did it have that new belt smell?
DO YOU HAVE ANYMORE?


BISHOP

[l921428x]

yes indeed welcome to the forum Metalman.

[metalman3006]

Metalman tell me about that one time use only ammo can that comes prepackaged with 308 or is that 30-06 cloth belted ammo?
First off all how much was it? and what year was it purchased?
How many rds was on the belt?
What country?
Did it have that new belt smell?
DO YOU HAVE ANYMORE?


BISHOP

I got it of Gunbroker a couple of years ago already opened with the tracers removed 3006 K 30 69 head stamp

[BISHOP]

OH thanks for the info and pics.


BISHOP

[FunkyPertwee]

Bubba snuck in this weekend and added increased night shooting abilities to my Mossberg 590.

Hi-Viz tactical fiber optic was 20 bucks. Its snaps on super tight and mates up to the bead. I like it because it doesn't replace the bead. Rail section is a little mag-pul rail I had laying around. I cut a relief on the inside of the handguard for the nut to sink into, and drilled three holes on the outside, one for the screw and two for the rail's mounting posts. I tightened the shit out of it and it feels rock solid. The rail looks like it is too far back, but in reality I had to had position the three holes evenly in the small space between the grip ribs and where the handguard tapers down at the front. Swapping the rail section with a cantilever type will push it forward to where it will look a little more "factory".

[rci2950]

Remington 742 Woodsmaster chambered in 6mm Remington. Manufactured April, 1978.

Thanks l921428x for the parts!

[rci2950]

My Remingtons, from top to bottom.
1. 1986 870 Express new in box
2. 1952 870 Wingmaster (My Grandfather bought new)
3. 1978 870 Wingmaster
4. 1989 870 Express
5. 2009 887 Nitromag
6. ???? Nylon 77
7. 1917 P17
8. 1978 742 Woodsmaster
9. ???? 760 Gamemaster Carbine
10 2004 700 SPS

[raxar]

Are canadians allowed to own that many?

[Richard Simmons]

For #6 you mean a Nylon 66 don't you? Is it missing the front sight?

[rci2950]

For #6 you mean a Nylon 66 don't you? Is it missing the front sight?

Nope is the 77. The 66 has a tube mag. The 77 takes detachable plastic magazines.

Yes the front sight is missing. When I got it, it was beaten up. A magazine was broken off in the well, the cocking handle was snapped off and the front sight broken off. I have replaced the cocking handle, dug out the bits of the old mag and bought two new ones. Havent gotten around to replacing the sight yet, I figure i will come across one someday. Its not my primary .22

I have fired it with a scope attached and it works well.

[raxar]

LOOK MA, I CAN MAKE LOTS OF NOISE AND NOT HIT ANYTHING!

[FunkyPertwee]

LOOK MA, I CAN MAKE LOTS OF NOISE AND NOT HIT ANYTHING!

I like AK pistols and want one of these with the "arm brace".

Even without a stock or the "arm brace" I think an AK pistol shoots good enough for most people's front and back yards. I'm sure it would do good enough to run off a group of Obama's sons, or defend your car with during a zombie attack.

[Silentkilla01]

LOOK MA, I'M TACTICOOL!

Now your getting somewhere!!! The Jennings would never had held up bro