PDA

View Full Version : Not a Mosin or Mauser, But Better Than the Mauser and Almost as Good as the Mosin!



Josh Smith
12-22-2011, 02:24 AM
Hello,

I got it in my head a couple months back that I wanted a Mauser. I went to a few gunstores and they all wanted around $400 to $600 for one. Nope. All had bent bolt handles, too, and I wanted a straight one, being a lefty and all.

So I saw this thing in my favorite gunstore. Said "Amberg 88" or some danged thing on it. It had been sitting there for the better part of the year.

The gunstore owner said he wanted to see it gone, and he'd make me a deal. It had rust in the bore but looked OK overall.

I called up a friend who knows some about these things, told me some of what to check for. I told the gunstore owner that I'd have to come back for it after doing some research as I didn't know if it would be a wall hanger or a shooter, though I do like a project.

He told me that I know how he dislikes old milsurps. I know... too much research to find their value. He also knows how I like a project and to make an offer. I told him I didn't feel right doing so because I'd likely insult him.

He said he was thinking 50 bucks.

Not to pass up a deal, I came back with "How about 25?"

"40."

"30."

"35."

"Sold!" says I. $37.50 out the door.

I got it home and pulled it apart. One dent, very little surface rust -- just one spot on what appeared to be a hood on the barrel. The barrel was pristine under that hood. I had been afraid maybe it was rusted through.

Happily, it was not.

I was pushing what looked like mud out of the barrel, and after liberal amounts of Fluid Film and bore brushes wrapped in steel wool, it started to shine.

Not the best bore I've ever seen, but far from the worst. I've seen worse bores on Mosin-Nagants shoot well.

Here are some pics:

http://i19.photobucket.com/albums/b191/WabashShootist/G88/DSC00129-1.jpg

http://i19.photobucket.com/albums/b191/WabashShootist/G88/DSC00137.jpg

http://i19.photobucket.com/albums/b191/WabashShootist/G88/DSC00132.jpg

http://i19.photobucket.com/albums/b191/WabashShootist/G88/DSC00141.jpg

http://i19.photobucket.com/albums/b191/WabashShootist/G88/DSC00140.jpg

http://i19.photobucket.com/albums/b191/WabashShootist/G88/DSC00139.jpg

http://i19.photobucket.com/albums/b191/WabashShootist/G88/DSC00138.jpg

http://i19.photobucket.com/albums/b191/WabashShootist/G88/DSC00146.jpg

http://i19.photobucket.com/albums/b191/WabashShootist/G88/DSC00145.jpg

http://i19.photobucket.com/albums/b191/WabashShootist/G88/DSC00144.jpg

http://i19.photobucket.com/albums/b191/WabashShootist/G88/DSC00143.jpg

http://i19.photobucket.com/albums/b191/WabashShootist/G88/DSC00142.jpg

http://i19.photobucket.com/albums/b191/WabashShootist/G88/DSC00136.jpg

http://i19.photobucket.com/albums/b191/WabashShootist/G88/DSC00135.jpg

http://i19.photobucket.com/albums/b191/WabashShootist/G88/DSC00134.jpg

http://i19.photobucket.com/albums/b191/WabashShootist/G88/DSC00131.jpg

http://i19.photobucket.com/albums/b191/WabashShootist/G88/DSC00130.jpg

http://i19.photobucket.com/albums/b191/WabashShootist/G88/DSC00127.jpg

http://i19.photobucket.com/albums/b191/WabashShootist/G88/DSC00125.jpg

http://i19.photobucket.com/albums/b191/WabashShootist/G88/DSC00124.jpg

http://i19.photobucket.com/albums/b191/WabashShootist/G88/DSC00123.jpg

http://i19.photobucket.com/albums/b191/WabashShootist/G88/DSC00122.jpg

With shooting, the bore is cleaning up. It shines now and there are only a couple dark spots in it that look like rust.

I'm still trying to decide for certain whether it's indeed redone for 0.323" bullets. It does have the "S" mark which means the chamber and leade were redone but the barrel was left as-was. Supposedly it can take either ammo, and I'm getting a little over an inch at 50 yards and 0.318" bullets.

It's showing low pressure signs, though, and the neck is blowing way up when I fire. I'm overworking my shells' necks. This coming week I'll try some 0.323" bullets lightly loaded in it -- they are on order. (As I'm given to understand, gas erosion was a problem with the 0.318" bullets and the 0.323" bullets were made to seal better. Dangerous to shoot in unmodified, non-"S" chambers).

This rifle originally saw action in a Bavarian reserve regiment before being shipped to Turkey for WWI (and you know it had 0.323" ammo shot through it there!).

This is, in my opinion, almost the perfect rifle. The sights are precise and the barrel (mine is reenforced) is floated for all intents and purposes by using that sleeve.

I would really only change the bolt. The lugs are a bit weak, and really should have a third. It's already been modified to 88/05 standards.

It kicks hard, in prone. I'm not willing to put a recoil pad on it, though, as length-of-pull is perfect for me. Might end up investing in a P.A.S.T. pad as I have a bruised collarbone after five shots prone with 200grn bullets. I'm not a recoil wuss and do this regularly with the Mosin-Nagant, but this rifle is a bit lighter!

The tall Mauser sight blank from Brownell's worked perfectly, and now it shoots POA.

So, you-all reckon I made out OK for $37.50? :eek: :D

Regards,

Josh

Bluntforce
12-22-2011, 03:18 AM
http://en.wikipedia.org/wiki/Model_1888_Commission_Rifle

Sergis Bauer
12-22-2011, 09:05 AM
Wow. An 1890's gun at a 1950's price. Not bad.

Schuetzenman
12-22-2011, 10:46 AM
Yes that is a comission 1888 Masuer Rifle. The barrel has a tube around it to support it at the muzzle end. These get damaged easily. Your rifle was sold to the Turks I think given the cresant moon engraved on it. Turky and the German Mauser Werks have a long history. The Turks loved Mauser made rifles and armed themselves exclusively for over 100 years.

I've seem G-1 FAL kits that came out of Turkey, owned one, it was my first FAL build. Back to your rifle, you stole that thing. It looks in decent shape and you should of paid about $280 bucks more or less for it.

az_paul
02-04-2012, 01:31 AM
Very nice catch. Congrats!

Helen Keller
02-04-2012, 02:35 AM
wow nice...

missed this.

I had one years ago and I shot Romanian 8mm through it with no signs of fatigue.

circuits
02-04-2012, 04:06 PM
Yes that is a comission 1888 Masuer Rifle. The barrel has a tube around it to support it at the muzzle end. These get damaged easily. Your rifle was sold to the Turks I think given the cresant moon engraved on it. Turky and the German Mauser Werks have a long history. The Turks loved Mauser made rifles and armed themselves exclusively for over 100 years.


The Gew.88 "commission rifle" is not a Mauser, and is one of the few guns used by the germanies which Mauser-werke never produced - they were made at Loewe, Haenel, Steyr-Mannlicher and the various Imperial Arsenals.

It's basically a Mannlicher, with a few mauser-like features. That particular one was produced at the Imperial Arsenal at Amberg.

Schuetzenman
02-04-2012, 05:17 PM
Oh and one other thing, the bolt is not up to modern ammo pressures so don't shoot any surplus military in it. Especially don't shoot any turkish 8 mm ammo in it. Being here in Japan I can't drag out my Olson book on Mauser rifles. There is something nonstandard about the bore on those rifles. I can't remember if it is running small or large. Current spec is .323" for bullet diameter of 8 mm bullets. At one time they could be as small as .316" or as big as 329" if my memory is serving me correctly at 7:15 AM on Sunday morning here in Tokyo.

On the Mauser relationship, going to have to go check that in my Olson book. I remember them being listed in it, if so Mauser had something to do with the design at least regardless of manufacturing point.