Got Started

[slamfire51]

Just about done with my camoed Zombie eliminator.
Just need to finish modifying the piston and carrier, and threading the barrel.
Recoil guide rod assembly is done.
Going a different route with the lower HGs.
Just haven't figured out which way I'm going.

http://i25.photobucket.com/albums/c80/Canis-latrans/camopistol.jpg

[Moebrown20]

Wow, major cool.

Mine isn't as mini.

http://i156.photobucket.com/albums/t39/moebrown20/Aug22_0002.jpg


I need to build a rail that goes all the way across, from front to back and use AR sights. and thread the barrel another 1.5 - 2 inches back so I could add a fake suppressor like the one I have on my very first Romy build.



http://i156.photobucket.com/albums/t39/moebrown20/Aug22_0001.jpg

[ATAK, Inc.]

Just about done with my camoed Zombie eliminator.
Just need to finish modifying the piston and carrier, and threading the barrel.
Recoil guide rod assembly is done.
Going a different route with the lower HGs.
Just haven't figured out which way I'm going.

http://i25.photobucket.com/albums/c80/Canis-latrans/camopistol.jpg


Hey Slam,

Do you need a threading kit? I still got mine, for 14x1lh, in 7.62, 5.56 and 5.45!

[slamfire51]

Wow, major cool.

Mine isn't as mini.

http://i156.photobucket.com/albums/t39/moebrown20/Aug22_0002.jpg

That's the kit you got a week or so ago? It's bad ass for sure.
So, you're going to use the same type HGs as the rifle? I'd like to on mine, but not enough room.

Lookin good!

[slamfire51]

Hey Slam,

Do you need a threading kit? I still got mine, for 14x1lh, in 7.62, 5.56 and 5.45!

I did as of Saturday. Krupski is sending a kit for me to use.

[Moebrown20]

That's the kit you got a week or so ago? It's bad ass for sure.
So, you're going to use the same type HGs as the rifle? I'd like to on mine, but not enough room.

Lookin good!

I want to add some type of tri-rail as a HG.
This way I could remove the AK sights and use something similar to this:

Front sight.... http://accuracynut.com/wp-content/uploads/2010/02/stock.jpg

Rear sight.... http://dynamicarmament.com/images/SIGSAUERLIGHT/SIG%20REAR%20SIGHT-diopter.jpg

Rail.... http://www.centerfiresystems.com/productimages/misc/HDG-AMD-D.jpg

Mock Suppressor.... http://www.shortyusa.com/cart/images/1707a.jpg


And grab a few 20 round clear mags like these: http://www.ftfindustries.com/d_715.jpg

[slamfire51]

I want to add some type of tri-rail as a HG.
This way I could remove the AK sights and use something similar to this:

Front sight.... http://accuracynut.com/wp-content/uploads/2010/02/stock.jpg

Rear sight.... http://dynamicarmament.com/images/SIGSAUERLIGHT/SIG%20REAR%20SIGHT-diopter.jpg

Rail.... http://www.centerfiresystems.com/productimages/misc/HDG-AMD-D.jpg

Mock Suppressor.... http://www.shortyusa.com/cart/images/1707a.jpg


And grab a few 20 round clear mags like these: http://www.ftfindustries.com/d_715.jpg


Hey, I like all those. I'd like to have a tri rail, but.......
The mock suppressor, I really like.

[Moebrown20]

Hey, I like all those. I'd like to have a tri rail, but.......
The mock suppressor, I really like.
Yeah.....!
I gotta figure out what type of rail I'm gonna add to the rear.

I was thinking something like these:

http://www.keepshooting.com/productimages/firearmaccessories/optics/ak-topcover-scopemountbig.jpg

http://www.keepshooting.com/productimages/firearmaccessories/optics/ak-mount-with-trirailb.jpg

[slamfire51]

Yeah.....!
I gotta figure out what type of rail I'm gonna add to the rear.

I was thinking something like these:

http://www.keepshooting.com/productimages/firearmaccessories/optics/ak-topcover-scopemountbig.jpg

http://www.keepshooting.com/productimages/firearmaccessories/optics/ak-mount-with-trirailb.jpg

You won't be able to use the last one, unless you are gonna SBR it.

[Moebrown20]

You won't be able to use the last one, unless you are gonna SBR it.

Okay, I'll cross that off.
I want the rear sight to be set far back, just like a pistol.

[slamfire51]

Okay, I'll cross that off.
I want the rear sight to be set far back, just like a pistol.



There's a company that sells a top cover with the rear sight already attached like the one you posted above.
I'll see if I can find the link.a

[slamfire51]

Found it.
But they are out of stock.

http://akpartskits.com/cart/index.php?main_page=product_info&cPath=5_12&products_id=18

[Moebrown20]

There's a company that sells a top cover with the rear sight already attached like the one you posted above.
I'll see if I can find the link.a

I've fount it: http://www.midwayusa.com/viewproduct/?productnumber=663834
I've found most of the stuff I need in midway.

[slamfire51]

I've fount it: http://www.midwayusa.com/viewproduct/?productnumber=663834
I've found most of the stuff I need in midway.

Make sure you secure the top cover so it doesn't wiggle, not that it's really necessary on a pistol, but helps.

[Moebrown20]

Make sure you secure the top cover so it doesn't wiggle, not that it's really necessary on a pistol, but helps.

I made it .5mm short just to make it a tight fit.

[slamfire51]

You may not be able to see them in my pic, but I silver soldered 2 legs coming down from the top cover and the 2 rear trunnion screws go through them.
Since yours is riveted, you won't be able to do this.

The top cover is rock solid.

[Krupski]

Just about done with my camoed Zombie eliminator.
Just need to finish modifying the piston and carrier, and threading the barrel.
Recoil guide rod assembly is done.
Going a different route with the lower HGs.
Just haven't figured out which way I'm going.


Cool. But it needs a sexier red-dot. That round "Famous Maker" $19 sight just screams "Printerman". A camo Kobra would look sweet......

(edit to add Photoshop):

http://three-dog.homelinux.com/phpBB3/download/bad-ass-pistol-with-kobra-sight.jpg

Now it looks bad-ass!

[slamfire51]

Cool. But it needs a sexier red-dot. That round "Famous Maker" $19 sight just screams "Printerman". A camo Kobra would look sweet......

(edit to add Photoshop):

http://three-dog.homelinux.com/phpBB3/download/bad-ass-pistol-with-kobra-sight.jpg

Now it looks bad-ass!

You know my addy!!!!
I'll be waiting for it.
BTW, don't tell printerman.

[slamfire51]

Got the piston and carrier done. Still haven't figured out the HGs yet. Any suggestions?

BTW, the red dot was on sale for $14.:biggrin:



http://i25.photobucket.com/albums/c80/Canis-latrans/004zombieak3.jpg

[azhonkey]

Just about done with my camoed Zombie eliminator.
Just need to finish modifying the piston and carrier, and threading the barrel.
Recoil guide rod assembly is done.
Going a different route with the lower HGs.
Just haven't figured out which way I'm going.

http://i25.photobucket.com/albums/c80/Canis-latrans/camopistol.jpg

hey,that looks great.good job.

[slamfire51]

I went with my usual HG. Still searching for an alternative.
A 20 rd. mag is next to be painted.


http://i25.photobucket.com/albums/c80/Canis-latrans/999999.jpg

[Moebrown20]

I went with my usual HG. Still searching for an alternative.
A 20 rd. mag is next to be painted.

You could always go with a rail and cut it down.

[slamfire51]

You could always go with a rail and cut it down.

I thought about that. A lot of rail will be wasted if I went that route.

[Moebrown20]

I thought about that. A lot of rail will be wasted if I went that route.

Yeah, it would only be worth it if you build another pistol.


Hint*

[slamfire51]

Yeah, it would only be worth it if you build another pistol.


Hint*


I'm afraid this will be my last unless a job turns up.

Thanks for the suggestion though.

[Moebrown20]

I'm afraid this will be my last unless a job turns up.

Thanks for the suggestion though.

How about you strip the war paint and go nickel and black?

[slamfire51]

I'm going to keep it as is (with a brake) for my truck gun.
No need in prettying it up to get knocked around.
When it does, it's just a matter of an easy touch up.
I've done quite a few "pretty" ones, so I'm not itching to make this one good looking.

[slamfire51]

Ok, threaded the barrel today. And she's done.
I fired 30 rds through her to make sure all is good. It is.

http://i25.photobucket.com/albums/c80/Canis-latrans/completecamo.jpg

[ubersoldate]

this thread is so full of win I might pass out.

[slamfire51]

this thread is so full of win I might pass out.

Huh??

[ubersoldate]

The pictures. Are Awesome.
Full of win, is a term used as a compliment, while Full of fail is the opposite..
The lil camo one is now my desktop pic.

[slamfire51]

The pictures. Are Awesome.
Full of win, is a term used as a compliment, while Full of fail is the opposite..
The lil camo one is now my desktop pic.

Thanks.
I guess I'm too old to know the "hip" lingo of these days.

[O.S.O.K.]

:laugh:

[slamfire51]

:laugh:


Watz you laffing at Willis????

[AKTexas]

Ok, threaded the barrel today. And she's done.
I fired 30 rds through her to make sure all is good. It is.

http://i25.photobucket.com/albums/c80/Canis-latrans/finished.jpg

Slam buddy that is a winner.SBR that flamethrower and you have a zombie killer for sure.

[slamfire51]

Slam buddy that is a winner.SBR that flamethrower and you have a zombie killer for sure.

I agree.
Bad thing is I may have to sell it to finish paying some bills.

[AKTexas]

I agree.
Bad thing is I may have to sell it to finish paying some bills.

I hate to be a vulture but if you need to let me know I might be able to swing it.

[slamfire51]

I hate to be a vulture but if you need to let me know I might be able to swing it.

Hell, vultures, buzzards, crows, possums, skunks are always welcome to buy. LOL

[Citizen Pain]

Dude, that thing has zombie popper written all over it! me jealous.

[slamfire51]

Dude, that thing has zombie popper written all over it! me jealous.

Thanks CP.
If I do sell it, I'm gonna have to come up with another ZK in a hurry.
No telling when they will start Armageddon. LOL

[Moebrown20]

I'm still working on mine.
I just removed both front and rear sights.
Gotta press the barrel in completely and prepare for testing.

[slamfire51]

I'm still working on mine.
I just removed both front and rear sights.
Gotta press the barrel in completely and prepare for testing.

So you're substituting both sights with Picatinny (rail) mounted ones?

[Moebrown20]

So you're substituting both sights with Picatinny (rail) mounted ones?

Yes.
My Zombie Killer (fake)suppressor is on it's way to finish it off.

[slamfire51]

Yes.
My Zombie Killer (fake)suppressor is on it's way to finish it off.

I went to the website that offers them.
Is the one you're getting have a closed tube from front to rear?
Or is it threaded on one end and open on the inside?

[Moebrown20]

Pics:

http://www.airsoftpost.com/images/large/MTX_11mm_Zomb_lg.jpg

It's 4" long. I was looking for a 14 RH pig, but no such luck.
I may have to cut it down to get a meaner look.

[slamfire51]

You still haven't answered my question.

[Moebrown20]

You still haven't answered my question.

Hollow, theaded on one in the front may have threads, but seal at factory.

[slamfire51]

Hollow, theaded on one in the front may have threads, but seal at factory.


You're going to have to make a "closed tube" inside from front to rear.
Otherwise if the can is open forward of the threads, the BATF will consider it a functioning suppressor.
A closed tube will act like a normal barrel, no noise suppression.

[Moebrown20]

You're going to have to make a "closed tube" inside from front to rear.
Otherwise if the can is open forward of the threads, the BATF will consider it a functioning suppressor.
A closed tube will act like a normal barrel, no noise suppression.

Got'cha. I may have to hack it up anyways, so it will be easy to install a tube.

[slamfire51]

Got'cha. I may have to hack it up anyways, so it will be easy to install a tube.


Good, better safe than sorry down the road.

[Moebrown20]

Good, better safe than sorry down the road.

Oh yeah!!!



I want some of the fs to stick into the rail, .
I have a dream of a very evil pistol in the near future.

[Moebrown20]

Today I got a few parts in so all the majors are done.
I even got a chance to play with the laser a bit:

http://i156.photobucket.com/albums/t39/moebrown20/pistol6.jpg

http://i156.photobucket.com/albums/t39/moebrown20/pistol1.jpg

http://i156.photobucket.com/albums/t39/moebrown20/pistol5.jpg

After some testing at the range, i'll tear her down, clean her up & get some more pics in.

[slamfire51]

Lookin great Moe.

That's the same rear sight I used, but modified it to fit the rail without the housing of the sight itself.

What finish are you going to use?

[Moebrown20]

What finish are you going to use?

I don't know yet, any suggestions?

Most of the time, I'd go with an oven baked-on satin or flat finish out of the can.

[slamfire51]

I don't know yet, any suggestions?

Most of the time, I'd go with an oven baked-on satin or flat finish out of the can.

I use a lot of matte black GunKote in the rattle can with great results.