WTS:Sheet metal AK butt stocks

[a-kmanator]

For sale.14 gauge plasma cut Custom sheet metal stamped receiver AKM butt stock.Weighs 4 oz. more than the factory wood.Installed they Measure approx.9 3/4 X 5 1/4 inches with a 13 1/2 inch LOP.installed.Includes thick rubber butt pad.Some minor fitting may be required to install.Tang screws not included or drilled.Painted flat black finish.Counts as 1 USA part.$38.00 + $5.00 shipping.Check or money order and discreet P.Pal +4% accepted.PM me for more details.I have few ea. of the 4 styles available:
Crossbone
http://i140.photobucket.com/albums/r35/a-kmanator/100_2980-1.jpg
Hammer&Sickle
http://i140.photobucket.com/albums/r35/a-kmanator/100_2976.jpg
Punisher
http://i140.photobucket.com/albums/r35/a-kmanator/100_3329.jpg
Zombie Chop
http://i140.photobucket.com/albums/r35/a-kmanator/100_3457.jpg
http://i140.photobucket.com/albums/r35/a-kmanator/100_3468.jpg
http://i140.photobucket.com/albums/r35/a-kmanator/100_2988.jpg
http://i140.photobucket.com/albums/r35/a-kmanator/100_2971.jpg

[Moebrown20]

Looks nice.
Are those MIG or TIG spot welds?
Do you have any video(s) with it in action?
Is this the finished product or prototype?
What is the weight?

Sorry about all the question, but the more we know, the faster you could sell them.

[deth502]

looks like theyre mig welded.

a-kmanator's a great guy to deal with and does great work :thumbsup:

hes actually right down the road from you, moe.

[a-kmanator]

Looks nice.
Are those MIG or TIG spot welds?
Do you have any video(s) with it in action?
Is this the finished product or prototype?
What is the weight?

Sorry about all the question, but the more we know, the faster you could sell them.

They are mig welded,They weigh 4 oz. more than a factory laminate wood butt and no,I don't have a vid of them...kman

[locosmith]

Are you still selling these? Thanks




They are mig welded,They weigh 4 oz. more than a factory laminate wood butt and no,I don't have a vid of them...kman

[a-kmanator]

PM sent Loco...............

[a-kmanator]

Back to the top with some new designs:dizzy:
the ZOMBIE CHOP BATTLE AXE
http://i140.photobucket.com/albums/r35/a-kmanator/100_3457.jpg
http://i140.photobucket.com/albums/r35/a-kmanator/100_3468.jpg

[O.S.O.K.]

Very cool and great price!

[Klawndyke]

I will take one of each... PM Sent
I have a gunshow this weekend and wont be back till monday
sucks not having internet at some of the shows

[Klawndyke]

OK love the stocks..
I will have to say this is the first time i have ever bought a gun just for a stock.
and i am glad i did..
i have never had the 545 39 so this worked out great and looks really good

http://www.gunsnet.net/photopost/data/500/medium/zombiak.JPG

Free bump

[romak10/63UF]

Can you make custom stocks ? like if i wanted a certian sysmbol ? or flag ?

[a-kmanator]

OK love the stocks..
I will have to say this is the first time i have ever bought a gun just for a stock.
and i am glad i did..
i have never had the 545 39 so this worked out great and looks really good

http://www.gunsnet.net/photopost/data/500/medium/zombiak.JPG

Free bump

Glad ya like it Klawndyke...plus you new gun is a write off....and I can do certain custom stuff but i am limited on fine detail since i am using a plasma torch with a 1/16th kerf.I tried to cut a stars and bars stock but failed....kman

[Schuetzenman]

OK love the stocks..
I will have to say this is the first time i have ever bought a gun just for a stock.
and i am glad i did..
i have never had the 545 39 so this worked out great and looks really good

http://www.gunsnet.net/photopost/data/500/medium/zombiak.JPG

Free bump

Is this one actually shaprened on what appears to be an AX edge?

[a-kmanator]

Is this one actually shaprened on what appears to be an AX edge?

It's ground to a bevel but the edge is blunt meaning it will not cut your arm off or destroy your gun case and should not be used to chop fire wood.Strictly for Zombies:zzombie::zzombie::zzombie::zzombie::zzombi e::zzombie::zzombie::zzombie:

[Moebrown20]

For sale.Zombie Chop
http://i140.photobucket.com/albums/r35/a-kmanator/100_3457.jpg

Okay, you got me with this one.
I'm going to stop by this week and pick one up.

[Moebrown20]

Okay, you got me with this one.
I'm going to stop by this week and pick one up.

Yeah, I'm gonna need this one.

[jnicita]

Can you please update on status / what you have in stock, and if not in stock, what the time to wait is? Were having a build party Sept 3 here in San Diego, and I would like to buy one or two to have, just checking on how long a notice ahead of needing it you would need.

interest in the zombie chop and crossbone
Thanks

[Moebrown20]

Can you please update on status / what you have in stock, and if not in stock, what the time to wait is? Were having a build party Sept 3 here in San Diego, and I would like to buy one or two to have, just checking on how long a notice ahead of needing it you would need.

interest in the zombie chop and crossbone
Thanks
He's been a bit busy with work........ But he will be ready by August yhe latest, so send him a PM with what you want and he will give a timetable to when it could be shipped out.

[a-kmanator]

Yes,..sorry for the late response here,I already started on another batch of these and will have some asap...thanks.

[Moebrown20]

Yes,..sorry for the late response here,I already started on another batch of these and will have some asap...thanks.

If you finish any this weekend, give me a call or pm. I'm on 611, so i'll stop by.

[Klawndyke]

My updated zombie tamer
a-kmanator did a really nice job on the stocks..

FREE BUMP


http://www.gunsnet.net/photopost/data/500/medium/SANY0381.JPG

[a-kmanator]

DAMN!...you really hate zombies!...looks badass!....thank you sir.:zzombie:..I'm working on a Bio-Hazard one now.
I received a photo from another customer's SBR Draco Z-Chop.This butt is only around 8 inches long.
http://i140.photobucket.com/albums/r35/a-kmanator/GetAttachmentaspx-1.jpg

[sar32]

Can you make one with a Swastika? Just kidding but nice work though on the stocks.

[deth502]

Can you make one with a Swastika? Just kidding but nice work though on the stocks.

sure he can, hell just use the pattern he used to make krupski's stock.

are you going to be in jim thorpe next week, a-k?

[a-kmanator]

sure he can, hell just use the pattern he used to make krupski's stock.

are you going to be in jim thorpe next week, a-k?
No...I will be at the Philly Armory show on Southhampton rd....and then later that month at the upcoming Splitrock show.

[Moebrown20]

No...I will be at the Philly Armory show on Southhampton rd....and then later that month at the upcoming Splitrock show.

I'll see you at the split rock show. It was real packed last time.

[kalbos]

are you still selling these?

Interested in a punisher one.

Please PM me

Thanks

BW

[zane]

These are cool !!

[Klawndyke]

they are cool and i cant wait to see the Bio-Hazard one
i need to get some more of these

[a-kmanator]

Thanks Klawndyke...I have the new "Gen 2" Bio hazard Z-Chops out now with the finger grooves for easy butt strokin :shootski::zzombie:
http://i140.photobucket.com/albums/r35/a-kmanator/100_4363.jpg