PDA

View Full Version : Ramon Allones Small Club Corona


TEN-32
09-06-2013, 02:58 PM
Terrible. Couldn't draw, off flavors, multiple relights. Do not buy. I'd heard these are just like the Special Selected only smaller. No.
http://imageshack.us/a/img22/7555/1njx.jpg
silentkilla
09-06-2013, 10:29 PM
i take it you do not like these..... if its anything like sticking dick in your mouth hook EddieB310 up with the rest. he will probably pay double what you did.
El Jefe
09-06-2013, 11:40 PM
Bummer, nothing worse than a plugged stick.

I'm still looking for my box of RASS to show, hopefully soon.
TEN-32
09-07-2013, 06:45 AM
i take it you do not like these..... if its anything like sticking dick in your mouth hook EddieB310 up with the rest. he will probably pay double what you did.

Cocktailing again are we...? LOL.
CigarGuy
09-07-2013, 08:21 AM
That's a shame. It is a tasty cigar when you can draw on it. Quality Control is not
as good as it should be.
mrkalashnikov
09-07-2013, 10:05 AM
Had that same problem w/ a $10 Griffin's robusto I tried smoking the other night.

Damn stick did NOT want to stay lit, even using my 3-flame stogie lighter. Would NOT draw worth a damn when finally lit, either. The center of the stick burned down a couple of inches, about the diameter of a pencil. :( I finally cut it down w/ my cutter but was still having draw/burning probs so I tossed it (hard) into the back yard.

I think when something like that happens it's probably due to a faulty roll job...malo hecho a mano. Sucks.
TEN-32
09-07-2013, 10:14 AM
Life is too short. I agree, toss it and start over.
CigarGuy
09-07-2013, 10:48 AM
When it won't stay lit, it may be too wet. If the draw sucks, short of trying to "drill" it, you have to pitch it.
El Jefe
09-07-2013, 01:42 PM
Any of the plugged cubans I've run across, had obvious hard spots somewhere in them that gave the bad spot away.

Any other cigars from other places, I can't remember the last time I had a bad stick.
CigarGuy
09-07-2013, 01:50 PM
I have a little hand drill made exactly for that but it's only about an inch long,
so if the knot is more than an inch from the head, it doesn't help.
El Jefe
09-07-2013, 02:03 PM
I have a little hand drill made exactly for that but it's only about an inch long,
so if the knot is more than an inch from the head, it doesn't help.

My pipe tool has this attachment on it like a long thin awl. Anything not longer than say a robusto it works on. If its longer, nope.