View Full Version : Prvi Partizan Brass
aliceinchains
09-22-2010, 06:57 PM
Anyone have experience reloading with the brass they use. I ordered some Prvi Partizan PPU 7.62x54R 150grn SP from AIM . And plan to reload after i shoot it.
O.S.O.K.
09-22-2010, 09:15 PM
Will most likely have crimped primers but other than that, nothing special.
That's the situation with their 5.56x45 'milspec' stuff.
aliceinchains
09-23-2010, 02:14 PM
Will most likely have crimped primers but other than that, nothing special.
That's the situation with their 5.56x45 'milspec' stuff.
I never dealt with crimped primers. Do i need a special die for removing?
GunBum
09-23-2010, 08:21 PM
No special die to remove the primers, but you need to remove the crimp after you remove the primer.
O.S.O.K.
09-24-2010, 01:17 PM
If you have a case chamfer tool, that can usually be used if it's nose is blunt enough.
I have an RCBS swaging die set for the purpose.
Check the ammo - it may not be crimped - I am not an expert on all offerings - but something to check. If it is, its obvious.
aliceinchains
09-24-2010, 05:12 PM
If you have a case chamfer tool, that can usually be used if it's nose is blunt enough.
I have an RCBS swaging die set for the purpose.
Check the ammo - it may not be crimped - I am not an expert on all offerings - but something to check. If it is, its obvious.
I am not an expert on all offerings either my friend. If need be i will buy the swagging die set.
abpt1
09-24-2010, 06:05 PM
I am not an expert on all offerings either my friend. If need be i will buy the swagging die set.
I used the rcbs at first and later upgraded to a dillon . both get the job done forget about cutting thats a pita !
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.