PDA

View Full Version : Prvi Partizan Brass



aliceinchains
09-22-2010, 06:57 PM
Anyone have experience reloading with the brass they use. I ordered some Prvi Partizan PPU 7.62x54R 150grn SP from AIM . And plan to reload after i shoot it.

O.S.O.K.
09-22-2010, 09:15 PM
Will most likely have crimped primers but other than that, nothing special.

That's the situation with their 5.56x45 'milspec' stuff.

aliceinchains
09-23-2010, 02:14 PM
Will most likely have crimped primers but other than that, nothing special.

That's the situation with their 5.56x45 'milspec' stuff.




I never dealt with crimped primers. Do i need a special die for removing?

GunBum
09-23-2010, 08:21 PM
No special die to remove the primers, but you need to remove the crimp after you remove the primer.

O.S.O.K.
09-24-2010, 01:17 PM
If you have a case chamfer tool, that can usually be used if it's nose is blunt enough.

I have an RCBS swaging die set for the purpose.

Check the ammo - it may not be crimped - I am not an expert on all offerings - but something to check. If it is, its obvious.

aliceinchains
09-24-2010, 05:12 PM
If you have a case chamfer tool, that can usually be used if it's nose is blunt enough.

I have an RCBS swaging die set for the purpose.

Check the ammo - it may not be crimped - I am not an expert on all offerings - but something to check. If it is, its obvious.



I am not an expert on all offerings either my friend. If need be i will buy the swagging die set.

abpt1
09-24-2010, 06:05 PM
I am not an expert on all offerings either my friend. If need be i will buy the swagging die set.
I used the rcbs at first and later upgraded to a dillon . both get the job done forget about cutting thats a pita !