PDA

View Full Version : Vepr-308 has come home.



AKTexas
01-21-2011, 01:43 PM
I need to go out and sight it in.I have various ammo to try.

imanaknut
01-21-2011, 02:21 PM
I am speechless! :think: But it is yours and I truly hope you enjoy it! :thumbspbig:

AKTexas
01-21-2011, 02:27 PM
I am speechless! :think: But it is yours and I truly hope you enjoy it! :thumbspbig:

It is not as rad as printertards but it does function as I want it to.It is as tacticool as it will ever be.

FunkyPertwee
01-21-2011, 02:27 PM
Not my style but I hope it shoots well for you.

Reminds me of what guys used to do to SARs when they were dirt cheap.

AKTexas
01-21-2011, 02:56 PM
Not my style but I hope it shoots well for you.

Reminds me of what guys used to do to SARs when they were dirt cheap.

I missed the cheap SARs.I have an Intrac II 5.45 that was quite a lot of fun but then 5.45 was impossible to find.So I sold it off.I did have install the Romy 22mm FSB installed,Warsaw length US stock set in black and a 20 plus mags.The rifle was not a tack driver but was fun to shoot.This is only one like this I own the others are more traditional and will remain that way.

imanaknut
01-21-2011, 02:57 PM
You have a right to enjoy what ever you do to that poor rifle. That is the beauty of many of these firearms that we enjoy, the ability to personalize them. ENJOY!!!! And I mean it!

ATAK, Inc.
01-21-2011, 03:04 PM
You have a right to enjoy what ever you do to that poor rifle. That is the beauty of many of these firearms that we enjoy, the ability to personalize them. ENJOY!!!! And I mean it!

Dayum!

Nice looking rifle :thumbsup:

Just not my bag, but then, not my rifle either.

Schuetzenman
01-21-2011, 09:02 PM
I like everything except the short barrel. But that's just me.

blobman
01-22-2011, 06:55 PM
id leave a negative feedback,you only got half the gun

AKTexas
01-22-2011, 07:35 PM
Damn you guys are harsh!I appreciate the comments though.

El Laton Caliente
01-22-2011, 08:49 PM
I like it but what is with the fore?

FunkyPertwee
01-22-2011, 08:52 PM
The mag conversion and pistol grip conversion are all I would need. I like the stock too.

AKTexas
01-22-2011, 10:07 PM
I like it but what is with the fore?

Jigga whats?

Infidelski
01-23-2011, 01:19 PM
AKTX thats an interesting rig, its a franknikov. I like its short barrel configuration, as odd as it looks just means its a one of a kind. Enjoy it and shoot the shit out of it!

ubersoldate
01-23-2011, 01:39 PM
Pure awesomeness right there...Will need a range report for sure.

El Laton Caliente
01-23-2011, 02:10 PM
Jigga whats?

In front of the receiver on the bottom, what is that attachment?

AKTexas
01-23-2011, 02:22 PM
In front of the receiver on the bottom, what is that attachment?

Magpul angled grip.I tried using it on the front end,my arms do not reach that far comfortably.In the position I have it makes very comfortable,easy to shoulder and the weight is perfectly balanced there.


Pure awesomeness right there...Will need a range report for sure.

I'm going to try to get to the range this coming weekend.School just started back and I'm swamped with reading the first assignments and preparing for the first projects and papers.

filthy phil
01-23-2011, 02:54 PM
Pure awesomeness right there...Will need a range report for sure.

i'm diggin it also :)

AKTexas
02-06-2011, 04:49 PM
I managed to get out to the range finally.

First run was with Monarch 145 gr.Cheap stuff at 9.99 a box of 20 from Academy.

From 50 yards the first 5 rounds were to sight in the Vortex sight.

With iron sights the groups were 5 shots 1-2",this grouping maintained with the last 30 rounds.

Second Run was at 100 yards with Monarch 145gr,Lake City 150gr,South African 148gr Surplus.Adjusted the Vortex for 100 yards.I shot 3 groups of 20.

Monarch:First 5 shots 2" group,total of 20 Shots 4" group

Lake City:First 5 shots 2" group,total of 20 Shots 4" group

South African:First 5 shots 2" group,total of 20 Shots 4" group

The South African is performing the same out the shorter barrel as it did out of the longer barrel.I'm pleased since I have two cases of the stuff.

The Monarch is an improvement over the longer barrel.Groups at 100 yards were 4-6" out of the short barrel.

The Lake City was limited,I was given just a couple of boxes to try out.

I suspect handloads will improve the group sizing,but the rifle is shooting as I expected.

The rifle is perfectly balanced right in front of the magazine where the trunnion is.

Shoulders quickly to pick up the sights.The Vortex is great sight,holds zero and the Ultimak gas tube dispersed the heat well enough.I'm going to take to Del Rio to shoot rocks off the cliff into the dry creek.We have a few rocks marked 70 yards and 120 yards.

Overall I'm pleased with the performance.I expected the rifle to really bark but not as much as the AR.

filthy phil
02-06-2011, 05:34 PM
great write up man thanks. i want one now

vit
02-06-2011, 05:39 PM
I like it :hoo-yeah:

AKTexas
02-13-2011, 01:02 PM
Short report.

Took rifle to lease this weekend.Off hand without using the sling for support I was hitting and splitting human head sized rocks at 70,90,and 100 + yards.No noticeable fireballs,not as loud as the .44 mag Blackhawk.Recoil was tame,quick follow up shots.

Hector of Elk River gets the credit for the barrel work,Mark Krebs the mag conversion.Mike Riddick for selling the rifle to me years ago.

M1A mags supplied by 44mag.com.

Thank you come again!

El Laton Caliente
02-13-2011, 01:47 PM
Did you fit the mags to the rifle or mod the rifle to the mags?

Atlantic Firearms
02-13-2011, 05:35 PM
What kind of front hand guard did you install on the rifle ? Did it take any major modifications ? We are now starting to get in some new imported Vepr rifles in 762x39 & .308 but they have the wood furniture sets.

AKTexas
02-13-2011, 05:52 PM
Did you fit the mags to the rifle or mod the rifle to the mags?

The rifle was modified for the mags.


What kind of front hand guard did you install on the rifle ? Did it take any major modifications ? We are now starting to get in some new imported Vepr rifles in 762x39 & .308 but they have the wood furniture sets.

That is the Ultimak lower rail system.It uses the original mounting screw from the handguard.This was a Robarms import I do not know how if this done by them or came that way from the factory.

HDR
03-05-2011, 04:42 PM
It is not as rad as printertards but it does function as I want it to.It is as tacticool as it will ever be.

I am sure you are deeply disappointed.. ;)

:lool: :lool:

AKTexas
03-05-2011, 04:46 PM
I am sure you are deeply disappointed.. ;)

:lool: :lool:

I cry each day...