They are bubba'ed, but I like them, even if you cringe.
Top: 91/30 Hex w/ turned down bolt
Middle: 91/30 Hex cut to 21-3/4". Turned down bolt. 3-9x scope.
Bottom: 91/30 Junker round receiver cut to 16-1/2". Turned down bolt, red dot.
My truck gun and back yard critter shooter.
Last edited by slamfire51; 06-28-2011 at 05:06 PM.
There's no problem an AK can't solve...........
GUNSNET Member Since 2003
CCW Permit
03 FFL
I admit, I did it before I knew better. To a Polish 1950's no less. Refinished the stock and did some cutting of the stock that sits under the bayonet to sporterize it. I'd like to go back in time and slap myself.
Trying to get on the no fly list, one post at a time.
i bet the bottom rifle in the pic is a fire breathing dragon/beast!
and the red dot is awesome. is she good past 75yds?
I'm the one that's gonna die when it's time for me to die, so let me live my life the way I want to.Jimi Hendrix
NRA Benefactor Member & 03 FFL
Haven't shot it past 50 yds so far. Dead on @ 50.Originally Posted by Broondog
It'll go to the range soon.
There's no problem an AK can't solve...........
GUNSNET Member Since 2003
CCW Permit
03 FFL
WOW that bottom one looks so short!
It's a truck gun.
I wish I could come up with a folding stock for it.
There's no problem an AK can't solve...........
GUNSNET Member Since 2003
CCW Permit
03 FFL
Just cut it off behind where you grip, install a hinge on one side and a latch on the otherBubba!!!
Just cut it off behind where you grip, install a hinge on one side and a latch on the other
Left hand or right hand door hinge?
Brass or pewter finish?
Interior or exterior?
Sooooo many options.
There's no problem an AK can't solve...........
GUNSNET Member Since 2003
CCW Permit
03 FFL
Left hand so it doesn't interfere with the bolt, outside cause of the radius of the stock, and after looking at the rifle, pewter might be the best match!
Oh, and don't forget the velcro to lock the stock in the folded position.
Self sticking or plain and use my exterior glue?
There's no problem an AK can't solve...........
GUNSNET Member Since 2003
CCW Permit
03 FFL
I'm thinking a pistol grip as well.
Maybe Printerman has some ideas.
There's no problem an AK can't solve...........
GUNSNET Member Since 2003
CCW Permit
03 FFL
Self sticking. On the hinge, doesn't matter what you get just flip it over and it'll work anyway you want it to.
Isn't that why the "K-files" forum was created?
I refinished the stock on the middle Mosin in the pic above.
The lighter brown just didn't do anything for me.
I mixed up my RIT dye concoction and I think it looks better.
There's no problem an AK can't solve...........
GUNSNET Member Since 2003
CCW Permit
03 FFL
Those are the most tasteful bubba jobs I've seen!
Except the missing front sight in the last one.
"I'm fucking furious, I'm violently angry, and I like it. If you don't know what that feels like then I feel bad for you"
Those are the most tasteful bubba jobs I've seen!
Except the missing front sight in the last one.
Thanks!
I knew something was missing.
The front sight is sitting on the bench. I'll put it back on tomorrow.
There's no problem an AK can't solve...........
GUNSNET Member Since 2003
CCW Permit
03 FFL
I suspect this was done in the 1930's-1950's (not by me), I bought it for $65 at a local show.
Ha!
I thought it was on purpose to make it "tactical". I'm glad I mentioned it!
"I'm fucking furious, I'm violently angry, and I like it. If you don't know what that feels like then I feel bad for you"
I suspect this was done in the 1930's-1950's (not by me), I bought it for $65 at a local show.
A nice job on the bolt.
There's no problem an AK can't solve...........
GUNSNET Member Since 2003
CCW Permit
03 FFL
The underside of the bolt is checkered as well, sort of kool if you ask me (in a bubba sort of way).
Posting Permissions
Reply With Quote
Bookmarks