Results 1 to 8 of 8

Thread: wum 1

  1. #1
    Junior Member

    Join Date
    Dec 2011
    Posts
    9

    wum 1

    will a Romanian M65 under folder stock assembly fit a Wum1

  2. #2
    Senior Member raxar's Avatar

    Join Date
    Jul 2010
    Location
    PA, where the cold is only matched by the isolation
    Posts
    3,686
    If the receiver has the circular cut out on the back it will not look very good
    "I didn't even expect him to come up here, thinking it was that sweet. Thinking it's that candy land like that," White said. "He wanted to pickpocket everybody. But people out here, they weren't going for none of that."

    Quote Originally Posted by Spambot
    We careered round and round for perhaps an hour, flying rather than floating, getting gradually more and more into the middle of the surge, and then nearer and nearer to its horrible inner edge.
    Quote Originally Posted by ROCK ME AMADEUS
    Then Use the motherfucking PURPLE ....

  3. #3
    Junior Member

    Join Date
    Dec 2011
    Posts
    9
    It does not have the cut out, It is the standard wood stock receiver.

  4. #4
    Junior Member

    Join Date
    Dec 2011
    Posts
    9
    I found this at Apex gun parts, they also have the parts kit with the trunnion.

  5. #5
    Administrator imanaknut's Avatar

    Join Date
    Jul 2010
    Location
    Indiana, a state that is trying to remain free.
    Posts
    10,602
    Without looking at the parts kit, if it requires modifying the very rare WUM-1 I would suggest not doing it. Especially a WUM-1 with a square cut to the rear of the receiver. Installing an underfolder would normally require cutting holes in the receiver, cutting out the rear trunion and adding the cover plate to the rear. There are some sets available that use the standard rear trunion with the underfolder using the new "stock insert". That would not require destroying the receiver and although would not look 100% would not destroy the value of the rifle.

    Of course, that was my 2 1/2 cents worth. It is your rifle.

  6. #6
    Junior Member

    Join Date
    Dec 2011
    Posts
    9
    the Wum1 belongs to a friend of mine he wants an under folder stock on it. what other stocks would fit it?

  7. #7
    Administrator imanaknut's Avatar

    Join Date
    Jul 2010
    Location
    Indiana, a state that is trying to remain free.
    Posts
    10,602
    With no modification, any European fixed stock set would work.

    My suggestion because you don't come across a WUM-1 every day, or year, tell your friend to look for and underfolding WASR-10. Those were factory made and would give him what he want. Even modifying a fixed stock WASR-10 would not hurt because they are not collector rifles like the WUM.

  8. #8
    Junior Member

    Join Date
    Dec 2011
    Posts
    9
    Thank you very much, your advise is well taken, I appreciate you and this forum for your helpfulness.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •