Results 1 to 13 of 13

Thread: Tula Ammo Quality?

  1. #1
    Team Guns Network Silver 04/2013 alismith's Avatar

    Join Date
    Jul 2010
    Location
    44th "Free" State
    Posts
    19,225

    Tula Ammo Quality?

    I just picked up a box of Tula .45 Auto from Wally World and was wondering how good the quality was compared to American name brand ammo.

    It's steel cased, boxer primed, non-corrosive. Being steel cased, will this have any damaging effect on my 1911 if I start using it as it's a lot cheaper than other brands?

    Thanks.

  2. #2
    Senior Member btcave's Avatar

    Join Date
    Jul 2010
    Location
    On a hill with the view of the rest of my life.
    Posts
    2,236
    You'll be fine. The steel cased ammo won't give any problems or damage your weapon. It's just urban legend IMO. I've never seen pictures where someone showed off a damaged weapon from steel cases. Your extractor may get more wear, but that would require a shit load of rounds. Again, my opinion.
    Trying to get on the no fly list, one post at a time.

  3. #3
    Forum Administrator Schuetzenman's Avatar

    Join Date
    Jul 2010
    Location
    East of Atlanta GA
    Posts
    15,035

    Exclamation

    I hope they worked out the kinks in it. Tula is the main Wolf ammo arsenal. Wolf .45 Auto was dog squeeze in 2003 to 2005. Haven't tried it since then.

  4. #4
    Contributor 02/2014 FunkyPertwee's Avatar

    Join Date
    Jul 2010
    Posts
    11,163
    I had bad luck with Wolf aka Tula 9mm. I always stick to Russian calibers for Russian ammo makers.
    "I'm fucking furious, I'm violently angry, and I like it. If you don't know what that feels like then I feel bad for you"

  5. #5
    Team Gunsnet SILVER 05/2012 deth502's Avatar

    Join Date
    Jul 2010
    Location
    PA
    Posts
    3,581
    ive never had problems with thousands and thousands of rounds of wolf. shot very little of it, but never had a problem with teh black box tula (which is what i think you got at walmart) but the white box tula i have had nothing but problems in 223. teh x39 seemed to work well.

  6. #6
    Junior Member

    Join Date
    Jul 2010
    Location
    Colorado
    Posts
    26

    Very happy with it myself

    I bought a few boxes on a whim at wally world about a month ago, shot it out of my TRP, no hiccups which was a surprise. Specifically as my TRP has been notorious for being picky with Ammo. I was a little worried it would be dirtier than wolf, but it turned out to be just fine. for the price, you can't do wrong by shooting it.

  7. #7
    Administrator Krupski's Avatar

    Join Date
    Oct 2001
    Location
    ┌П┐(◣_◢)┌П┐
    Posts
    15,653
    Quote Originally Posted by btcave View Post
    You'll be fine. The steel cased ammo won't give any problems or damage your weapon. It's just urban legend IMO. I've never seen pictures where someone showed off a damaged weapon from steel cases. Your extractor may get more wear, but that would require a shit load of rounds. Again, my opinion.
    I don't mean to argue, but steel case ammo CAN damage your weapon. Several years ago I bought a case of Wolf .45 ACP and after about 200 rounds the firing pin hole in my 1920 Colt M1911 was peened closed so it wouldn't fire. There was a round "imprint" of the rear of the shell casing smashed into the breechface.

    Thank goodness my gunsmith was able to mill it and adjust the headspace and fix her up.

    And, here's a pic:

    See the firing pin hole? It's still dinged... but at least the gun works now.
    Gentlemen may prefer Blondes, but Real Men prefer Redheads!

  8. #8
    Contributor 02/2014 FunkyPertwee's Avatar

    Join Date
    Jul 2010
    Posts
    11,163
    Holy Shit Krupski.

    I hate to say it, but I wouldn't ever put Wolf through ANY valuble or collectible firearm. Sorry your baby got scarred.
    "I'm fucking furious, I'm violently angry, and I like it. If you don't know what that feels like then I feel bad for you"

  9. #9
    Team GunsNet Silver 07/2012 NewbieAKguy's Avatar

    Join Date
    Jul 2010
    Location
    People's Republik of IL
    Posts
    1,441
    Quote Originally Posted by Krupski View Post
    I don't mean to argue, but steel case ammo CAN damage your weapon. Several years ago I bought a case of Wolf .45 ACP and after about 200 rounds the firing pin hole in my 1920 Colt M1911 was peened closed so it wouldn't fire. There was a round "imprint" of the rear of the shell casing smashed into the breechface.

    Thank goodness my gunsmith was able to mill it and adjust the headspace and fix her up.

    And, here's a pic:

    See the firing pin hole? It's still dinged... but at least the gun works now.
    Interesting. Now my question is will today's modern machining/heat treatment processes, etc. hold up better than 1920's era metallurgy? I would have to say yes. I've run a couple hundred rounds of wolf through my Taurus 1911 and no signs of damage at all. Anyone volunteer their "modern" 1911 to a torture test?
    "The God who gave us life, gave us liberty at the same time; the hand of force may destroy, but cannot disjoin them. ... Can the liberties of a nation be thought secure when we have removed their only firm basis, a conviction in the minds of the people that these liberties are the gift of God? That they are not to be violated but with His wrath? Indeed I tremble for my country when I reflect that God is just: that his justice cannot sleep for ever."--Thomas Jefferson

  10. #10
    Junior Member

    Join Date
    Feb 2011
    Posts
    4
    I'd rather save up some more money and buy PMC.

  11. #11
    Team Gunsnet SILVER 05/2012 deth502's Avatar

    Join Date
    Jul 2010
    Location
    PA
    Posts
    3,581
    1911 fp hole bushing is a common gunsmith practice. the wolf was prob just a little hotter than what your used to running. id bet any hot ammo would do the same. id put my money on it having more to do higher pressure than steel cases.

  12. #12
    Senior Member abpt1's Avatar

    Join Date
    Jul 2010
    Location
    Southeast PA ,
    Posts
    2,996
    Quote Originally Posted by deth502 View Post
    1911 fp hole bushing is a common gunsmith practice. the wolf was prob just a little hotter than what your used to running. id bet any hot ammo would do the same. id put my money on it having more to do higher pressure than steel cases.
    Yeah i bet the ammo from the era of that 1911 is from was much less potent than todays ammo and I have found that cheap factory ammo tends to get hot now and then out of the blue ....

  13. #13
    Senior Member

    Join Date
    Aug 2010
    Posts
    266
    I fired 3 boxes of their 223 through my AR a couple of weeks ago.

    No problems...and a lot cleaner than I was expecting.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •