Results 1 to 6 of 6

Thread: Any VEPR owners given this a whirl?

  1. #1
    Junior Member

    Join Date
    May 2011
    Posts
    14

    Talking Any VEPR owners given this a whirl?

    I think it could be a nice answer to other furniture options.

    http://www.dinzagarms.com/vepr/vepbor2.html

  2. #2
    Junior Member

    Join Date
    Aug 2012
    Posts
    10
    I've tried theirs. Decent product. We came up with a solution that costs less and is made for the DIY guy.

  3. #3
    Junior Member

    Join Date
    Aug 2012
    Location
    Atlanta GA
    Posts
    3
    Here is what I have done with my Vepr:
    http://store.carolinashooterssupply....earm-Ar/Detail It comes with the mounting ring for the front. I carefully modified the block where it slips into the trunnion. There is a bar that houses one of the rivets that prevents the forearm from sliding all the way in, so I ground it down (slowly and carefully) until it slid right into place, then I drilled a hole in the trunnion that matched up exactly with the tapped hole in the foregrip so I could install a retention screw. Perfect fit and a great look.
    For the stock I went with Krebs Customs: http://www.krebscustom.com/PartsPage...kovParts.shtml . This adaptor is specifically for the Vepr - slant cut to fit. I got a pignose adaptor, CAR tube and Vltor stock to finish it off.
    I'm also refinishing the walnut stock and forearm. It's going pretty well but I'm not stopping until they glow.

  4. #4
    No, but was going to use one on my saiga.

  5. #5
    Junior Member

    Join Date
    Sep 2012
    Posts
    1
    Good info

  6. #6
    I may just have to try that little thingy.. Thanx for the heads up

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •