I decided to take an 8mm fired surplus berdan primed case and get the primer out. It was actually very quick and easy. I used my cordless drill and a 3/16 bit to start. I just bowled the primer a bit then I changed to a 1/16 bit and made a 45 degree angle hole to avoid hitting the anvil inside the primer pocket. I then took a mini dollar tree screwdriver and pried the primer out. came out no sweat. I then emailed the guy i get my reloading component from and he has berdan primers. So I am going to pick up a packet or two next time I am there. I will take the de-capping pin out and resize with just the expander so I don’t break the pin off. This should be just fine.